Automatically removing the nails recycling template for wood board shredder /formwork panel used crusher in construction site
The finished product of formwork panel used crusher is around 3cm-10cm,length 30mm,dia3mm,the shape is same with matchstick.As the big shape of raw material,the machine are adopt strength type 14mm thickness screen,Foramina ethmoidal can be processed at least 22mm aperture,thus the finished product is big,rough shattered,widely use in waste template crusher,goods shelf,wood pallet,bamboo plywood in construction site,artificial board, composite board,the raw material of power station boiler,Individual wood processing factory.
This kind of formwork panel used crusher are new design products,apart from have the advantage of traditional form board crusher,also can solve the problem of the course of crushing with nails.Our form board grinder can remove the nails for building template.The building template crusher has high capacity,can crush the plank to 3-15mm hub,the rate of removing nails can reach 95%.
Our machine adopt automatically feeding device:raw material--automatically feeding--four rollers squeezing and fractured ground--crushing chamber--material conveyor--belt conveyor equipment--removing iron device--finished products
Compared with same type formwork panel used crusher , wood board shredder can smash the wood material with nails,and separate the nails and reducing the worry to removing the nails.we can ensure the production just like our two hands cross,no space for remaining nails,no matter how small nails,will be perfectly dislodged.
Range of application of formwork panel used crusher
widely use in waste template crusher,goods shelf,wood pallet,bamboo plywood,artificial board, composite board,the raw material of power station boiler,Individual wood processing factory.
Our machine has main working platform,including feeding material compression roller and conveyor etc.
♥ 1.feed conveyer:to place the ready crushing of plate type wood material
♥2.Feeding compression roller:control feeding speed and keeping the material from slippage and no feeding situation.
♥3.Spiral crushing roller:peripheral direction averagely distribute welding slicer,to ensure breaker roll stress fitly.
♥4.Template crushing have feeding and crushing synchronously,can reach the balance of crushing.
♥5.Feeding roller adopt UCK series bearing plus spring compressing structure,adapt to different plate thickness material to crush.
Feeding compress roller and breaking roller use different power system,easily to control.
Feature of formwork panel used crusher
1.Our machine the special feature is crush the wood material with nails.
2.Template crusher adopt brittle material,no blocking,fewer dusts,;low noise.
3.The design of our machine,shorten the time of material retention in Crushing room,increasing the lifetime in quick wear parts.
4.Template crushing machine,plywood crusher,special hammer technology,make the strength of hammer can increase twice and three times than ordinary hammer.
The characteristic of Template crusher:
sh type blade,crush the template completely.
6.Use the special blade,the hardness of blade can’t below HRC55,file’s HRC hardness is 51 degree.
7.Strength and firm structure,densely covered and strength type rib plate,ensure the solid of tank.
Technical parameter: formwork panel used crusher
Model | YX-500 | YX-800 | YX-1000 | YX-1300 | YX-1500 |
Feeding material convey width | 500 | 800 | 1000 | 1300 | 1500 |
Feeding dimension | 500*100 | 800*120 | 1000*150 | 1200*200 | 1500*250 |
Main machine power | 22 | 37 | 45 | 75 | 90-132 |
Roller feed power(kw) | 4 | 4 | 4 | 5.5 | 7.5*2 |
Feeding speed(m/s) | 0.45 | 0.65 | 0.75 | 0.80 | 1.1 |
Rotary speed of conveying(r/min) | 650 | 650 | 650 | 650 | 650 |
Rotary speed of crusher(r/min) | 680 | 680 | 680 | 680 | 680 |
Productivity speed(t/h) | 1-3 | 3-8 | 5-10 | 7-15 | 12-25 |
Weight of machine(t) | 3 | 6 | 8 | 12 | 16 |
formwork panel used crusher
♣ Contact