Product Details

10/100/1000Base-T to 1000Base-LX multimode cassette fiber media converter

I:Product Summarize.

Fiber media converter be used to tramsmission Ethernet electric signals into optical signals,the features is transmit and receive optical signals in-phrase by pair of fiber optical cable,due to the signal transmission is light pulse form, so relative to the metal wires are incomparable advantages: high security, reliability, transmission speed, long distance, low cost, saving non-renewable resources. These characteristics are very suitable for metropolitan area networks and local area networking applications.

This series of fiber media covnerter adopted powerful ASIC chip, simple design, high reliability, low power consuming and so on. Alarm function can be remind of the link failure occurs and prompts fault location in time.Use high-quality optical transceiver modules, optical properties provide a good electrical characteristics, to ensure reliable data transmission, long working life.

II:Produce feature.

According to IEEE802.3z/ab,IEEE802.1q,IEEE802.3u,1000Bast-SX/LX,IEEE802.3ah standard.

Support IEEE802.3X flow control function.

Ethernet port support 10/100/1000M,full-duplex and semiduplex auto-negotiation.

Ultra-low time-delay data transmission, completely transparent to the network protocol.

Port support VLAN,port monitoring.IPV6 port monitoring flux is 4K,base on MAC’s Trunking.

Effectiveness of automatic link transfer,dual Tagging/QinQ.

Support for spanning tree and loop detection, IGMP,MLD.

Link failure alarm(LFP)function.

Built-in 128KB RAM data buffer,suport 9728Bytes long data packet.

50/125um or 62.5/125um multimode fiber link transmission distance up to 2KM.

9/125um singlemode fiber link transmission distance up to 120KM.

Modulization configuration design ,card can be insert to centralized power supply chassis.

Support 1pcs SFP port, can freely choose the SFP transceiver for single mode/multimode with different transmission distance.

Support hot-swappable,plug and play.

6 LED indicators ,dynamix feedback link connection state and fault detection.

Easily adjust link failure alarm function open and transmission mode.

Built-in lightning protection circuit, significantly reduce the damage caused by thunderbolt induction.

Average working time more than 100,000hours without failures.

III.Basic features:

Item		Specification/Term
1	Item number	APT-1124Lseries
2	Standard	IEEE802.3u,10/100/1000Base-T,1000Base-SX/LX,IEEE802.3ah, IEEE802.3z/ab
3	Flow control	IEEE8.2.3x port flow control and backpressure control
4	Transmission speed	10M/100/1000M auto-negotication
5	Transmission mode	Full-duplex/semiduplex (auto-negotiation)
6	Conversion mode	Storage transmission
7	MAC address	VLAN 4K
8	Buffer space	128KB
9	Packet length	Storage transmission:9728Bytes,straight-through,infinite.
10	Time-delay	9.6us
11	Bit error rate	<1/1000000000
12	MTBF	100,000 hours
13	Power supply	AC100~265V 50/60Hz / DC5V 1A
14	Power dissipation	<2.5W
15	Interface	Eletric port:RJ45,Fiber port:SC/FC or SFP
16	Twisted-pair	Cat.5,Cat.6
17	Multimode fiber	50/125,62.5/125um
18	Singlemode fiber	8/125,8.3/125,9/125um
19	Wavelengh	850nm/1310nm/1550nm
20	Transmit distance
	1)Dualfiber multimode	550m
	2)dual fiber singlemode	20/40/60/80/100/120Km
	3)single fiber singlemode	20/40/60/80Km
	4)Cat.5 twisted-pair	100m
21	Operating temperature	0~50°C
22	Storage temperature	-20~70°C
23	Humidity	5%~90% (no condensation)
24	Size	115 * 77 * 26mm (LWH)(card type without metal box) 118 * 87 * 28mm(LWH)(with metal box) 15812832mm(LWH)(Built-in power supply)