DC48V 2A Maximum power 25W Switch:

product feature

1.1000 series

a.APT-10041F-S  4 ports Bast-T to 1 port Base-Fx Poe ethernet switch feature

1). Comply with IEEE802.3, IEEE802.3u, IEEE802.3af / at other standards

2).Support MDI / MDIX auto- negotiation

3).Ultra-low latency data transmission, completely transparent to the network protocol

4). Integrated 1K MAC address table, MAC automatic learning and creating the table

5). Support spanning tree protocol

6).Back pressure half-duplex flow control and full-duplex flow control pause frames to prevent the loss of data frames

7). Support hot-swappable, plug and play

8). Built-in lightning protection circuit

9). Maximum Poe power: each port maximum 25W, Poe maximum reach distance 100m;

10) MTBF time>50,000 hours

b.APT-1008   8 ports Base-T Poe ethernet switch feature

1)Comply with IEEE802.3, IEEE802.3u, IEEE802.3af at other standards

2) Support MDI / MDIX auto- negotiation

3) Supports PWM power management tools

4) Support prioritization services based on QoS 802.1p

5) Support forwarding maximum packet length 1552 bytes

6) Support port mirroring function

7) Support Link aggregation (LACP)

8) Support VLAN based-on port

9) Support hot-swappable, plug and play

10)Built-in lightning protection circuit

11) Maximum Poe power: each port maximum 25W, Poe maximum reach distance 100m

12)MTBF time>50,000 hours

c.APT-10081F-S   8 ports Base-T to 1 port Base-Fx Poe ethernet switch feature

1) Comply with IEEE802.3, IEEE802.3u, IEEE802.3af / at other standards

2) Support MDI/MDIX auto- negotiation

3) Support prioritization services based on QoS802.1p

4) Support PWM power management function

5) Support forwarding maximum packet length 1552 bytes

6) Support port mirroring function

7) Support MAC 1K address

8) Support Link aggregation (LACP)

9) Support hot-swappable, plug and play

10) Built-in lightning protection circuit

11) Maximum Poe power: each port maximum 25W, Poe maximum reach distance 100m;

12) MTBF time>50,000 hours

d.APT-10062F-S  6 ports Base-T to 2 port Base-Fx Poe ethernet switch features

1). Comply with IEEE802.3, IEEE802.3u, IEEE802.3af / at other standards

2). Support MDI/MDIX auto- negotiation

3). Support prioritization services based on QoS802.1p

4). Support port mirroring function

5).Support MAC 1K address

6). Support VLAN isolation mode

7). Support hot-swappable, plug and play

8). Built-in lightning protection circuit

9). Maximum Poe power: each port maximum 25W, Poe maximum reach distance 100m;

10). MTBF time>50,000 hours