Name: 50 to 120hz for 32"/43"/46"/47"/55"/65" TFT LED PANEL CONVERT BOARD
Brand: NODKA
Availability: InStock

Product Details

TV control board,touch controller and LVDS interface
General Description	ND-PL.MS6M30.1B-1doubles the frames (50Hz → 100Hz conversion, 60Hz → 120Hz conversion, 24Hz → 120Hz conversion, frame interpolation) of the video signal output (Full-HD signal by LVDS interface) from a TV control board and then supplies the frame-Doubled video signal to a panel provided with LVDS input.
Function Layout	The picture is for a reference only, the actual item is the standard. The optional connectors and terminals are marked with “*”
Features
NO.		Symbol
CHIPSET		MAX POWER CONSUMPTION
POWER REQUIREMENT		Default 5V
MAX POWER CONSUMPTION		4W
Note: You can distinguish 5V or 12V Power Supply for the board with“L1”. If there is no “L1” on your board, that means your board is 5V Power Supply. Otherwise, it means your boardis 12V Power Supply.
Frequency	INPUT(50Hz/60Hz)	→	OUTPUT(100Hz/120Hz)
	1 phase, Max 83MHz	→	2 phase, Max 83MHz
	2 phase, Max 74.25MHz	→	4 Phase, Max 74.25MHz
Video Signal	WXGA 768p (1366x768)	→	WXGA 768p (1366x768)
	Full-HD 1080p (1920x1080)	→	Full-HD 1080p (1920x1080)
ChipFunctional Differences
	MST6M30QSC	MST6M30QSR-LF	MST6M30RS-LF
2D to 3D	×	√(SW)	√(HW)
3D	√	√	√
3D MEMC(SG)
2D MEMC
Local Diming	×	√	√
ISP Address	0x94
Note: The chip can be identified through the logo resistance on the board, as the fellow picture.
Interface Definitton	The optional connectors are marked with “*”.
CN6(4PIN/2.0):EXTERNALIIC CONNECTOR*
NO.	SYMBOL	DESCRIPTION
1	3V3	+3.3V Power Input
2	SCL	DDC CLOCK
3	SDA	DDC DATA
4	GND	Ground
CN7(5PIN/2.0):SYNCSIGNAL FORGLASSESBY 6M30
NO.	SYMBOL	DESCRIPTION
1	GND	Ground
2	SG_SYNC	Sync for 3D glasses (Default connect to the PIN34 of CN2)
3	RXD	Receive Date(reserved)
4	TXD	Transfer Date(reserved)
5	VCC	VCC Power Supply for Launch box of 3D glasses(Follow with the board Power supply)
Note: If the board is 12V Power supply, the VCC of CN7 cannot use as power for the launch box of 3D glasses.
CN8(2PIN/2.0):ADJCONNECTOR
NO.	SYMBOL	DESCRIPTION
1	GND	Ground
2	ADJ	Brightness Adjustment for Panel(Default connect to the PIN36 of CN2)
Configuration & General Precatuions	Relative humidity: ≤ 80%.
	Storage temperature: -10~60°C.
	Operation temperature: 0~40°C.
	Protect the control board from static, it may cause damage to the IC.
	Disconnect the TV before the power supply of panel is connected correctly.
	Do not drop any metal on the control board when it is working.
	Do not push or pull the connector when the control board is working.
	Do not disassemble the module.
	If the surface or the control board is dirty, clean it with soft dry cloth.
	Can’t be pressed and distorted.