Specifications

1. Brass hollow rivet
2. material:copper, brass,Aluminium,steel
3. All size can be custom
4. Rohs tested passed

Brass hollow rivets  / blind rivets

Commonly are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off.

 

These types of blind rivets have non-locking mandrels and are sometimes avoided for critical structural joints because the mandrels may fall out, due to vibration or other reasons, leaving a hollow rivet that has a lower load-carrying capability than solid rivets.

 

Furthermore, because of the mandrel they are more prone to failure from corrosion and vibration. Unlike solid rivets, blind rivets can be inserted and fully installed in a joint from only one side of a part or structure, "blind" to the opposite side.

 

 

 

Product Other Information
Standard	ISO,DIN,IFI,JIS,ANSI,BSW
Material	1.Stainless Steel: SS201, SS303, SS304, SS316, SS410, SS420  2,Steel:C45(K1045), C46(K1046),C20   3.Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200CuZn37), C28000(CuZn40) 4.Bronze: C51000, C52100, C54400, etc 5.Iron: 1213, 12L14,1215  6.Aluminum: Al6061, Al6063 etc  7,.Carbon steel: C1006,C1010,C1018,C1022,C1035K,C1045 8, Alloy steel: SCM435,10B21
Tolerance quality	5g, 6g, 6H, 7H, 45H, 33H,
Tolerance	js15, js17
Grade&Tensile strength	1. Carbon steel: 3.6-12.9
	2. Stainless steel: A2-50, A2-70, A4-70, A4-80
Process	Cold forming, hot forging, maching, etc
Surface treatment	Zn- Plated,Ni-plated,Passivated,Tin-plated,Sandblast and Anodize,Chromate, Polish,Electro Painting,Black Anodize,Plain,Chrome plated,Hot Deep Galvanize(H. D. G. ) etc.
Sample	we can provide you the sample for free if it is available
OEM service	accept

 

 

Testing of blind rivets

 

 

A blind rivet has strength properties that can be measured in terms of shear and tensile strength. Occasionally rivets also undergo performance testing for other critical features, such as pushout force, break load and salt spray resistance. A standardized destructive test according to the Inch Fastener Standards is widely accepted

 

 

The shear test involves installing a rivet into two plates at specified hardness and thickness and measuring the force necessary to shear the plates. The tensile test is basically the same, except that it measures the pullout strength. Per the IFI-135 standard, all blind rivets produced must meet this standard. These tests determine the strength of the rivet, and not the strength of the assembly. To determine the strength of the assembly a user must consult an engineering guide or the Machinery's Handbook

 

 

 

 Test equipment

 

 

 

Products pictures show: 

 

 

   

 How to place an order?

 

 

 About shipment

 

1. By sea, by air, by door to door express (FedEx, UPS, DHL, TNT, EMS).
2. For Air Shipment, Please choose your favorite, shipping method according your detail requirement
3. The shipping discount is different because of different weight and destination, we will choose the cheapest and safest way according to your detailed requirement.
4. Normally, it will take around 3-7days from China to destination country  

 

 

 WHY CHOOSE US

 

 

 

 

 

Thank you for coming to our website. If you have any questions or suggestions, please do not hesitate to contact us, we will reply you within 12 hours!!!