Specifications

1800 MoSi2 heating elements
working temp: 1750C in air (short time)
1650C in N2
1170C ~ 1450C in H2

RussiaTech 1800 MoSi2 Heating Element

Specification:

• Materials: MoSi₂
• Working temperature:Volume Density: 5 ~ 5.6g/cm3
  • 1750°C (3182°F) in air (short time)
  • 1650°C (3002°F) in N₂
  • 1170°C ~ 1450°C (2138°F ~ 2642°F) in H₂
• Bend strength: 15 ~ 25kg/cm3
• Vickers hardness: (HV) 570kg/mm2)
• Porosity rate: 7.4%
• Water absorption: 2%
• Heat extensibility: 4%

Dimension:

packing of the heaters

Installation

When installing heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.  

Warning:

Resistivity Properties of MoSi₂ Heating Element

1. The resistivity of MoSi₂ heating elements rises with increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
2. Generally the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.