Product Details

Specifications

sintering dental equipment
1.high performance
2.mini dental sintering furnace
3.heating faster
4.CE

1. KJ-1700X Programmable heat treatment dental sintering furnace

2. Heated by MoSi2 rod,

3. Max. temp., 1700C; Working temp., 1650C.

Model: KJ-1700X

Size: 120x120x130mm(WxHxD).

Features:

1. Operation Temperature: 1600°C ( 1700°C for short time).

2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation.

3. Heavy duty double layer structure with cooling fan. Lower teperature in outside case.

4. PID automatic control via current limiting phase angle fired the resistor, e.g. SCR(Silicon Controlled Rectifier). Energy saving ceramic dental furnace

5. Power control with 30 segments programmable.

6.High efficiency cooling fun.

7.USB port for software updates (optical).

8. Special requirement can be designed.

Descriptions:

KJ-1700X Programmable heat treatment dental sintering furnace

is designed as table model with MoSi2 heating rods, these models offer numerous advantages when sintering zirconia. The large heating chamber and fast heating-up times make this model a good selection for the CAD/CAM processing of zirconia. The furnace controller can be freely programmed for the individual sintering of the zirconia material. The furnace is available in different sizes.

Chamber Size	120 x 120 x 130 mm
Working Temperature	1600°C ( continuous )
Maximum Temperature	1700°C
Temperature Control	30 steps programmable and PID automatic control
Heating Rate	0~15°C/min (suggestion: ≤10°C)
Temperature Accuracy	+/-1°C
Heating Element	Molybdenum Disilicide (MoSi2)
Working Voltage	AC 220V, Single Phase, 60/50 Hz (or according to your requirement)
Max. Power	4 KW
Outside Size	480 x 465 x 680mm
Wooden box size	580 x 565 x 880mm
Net Weight	80 Kg
Gross Weight	95 Kg

Note: there are different chamber sizes for your choice.