Specifications

professional ink refill tool for Canon PG 210 510 810 CL 211 511 811
ABS
work for ink refilling

 

professional ink refill tool for Canon PG 210 510 810 CL 211 511 811 

 

**high quality ABS material
**small size
**simple operation with detailed manual instruction with pictures

 

 

size is 7*3.3*6.2cm
weight is 24.9g/piece

 

packing information
model	QTY in Inner box	QTY in master box (PCS/master box)	G.W. (KG)	N.W. (KG)	CARTON SIZE (CM)
T12	40pcs/inner box	480pcs/12inner box	15	14	46*41*42
T12	40pcs/inner box	240pcs/6inner box	7.5	7	37*34.5*27.5

  

Attention: The BLACK rubber pad is inserted for the black cartridge, the RED rubber pad is for Yellow color of color cartridge, and the blue rubber pad is for Magenta and Cyan color of color cartridges.

 

Operation steps:

 

Get ready

Tear off the label on the ink cartridge to check the ink injection inlet. Please make sure the color of ink for each ink inlet.

Attention: You may need to open the refill hole by using a drilling tool.

 

Insert inkjet cartridges

Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it "clicking" into place.

 

Refilling ink

Insert the injection needle deep into the ink injection inlet of the specific color, with the needle directed towards the nozzle.

Pull up the injection needle about 5mm backwards, and then slowly inject appropriate ink. Repeat injection for each color if necessary.

 

Stabilize Internal Pressure

Connect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 0.5ml of ink is filled in the syringe.

Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue.

Install the cartridge into the printer, and run "nozzle/head cleaning" process before use.