Enamel Water Tank
Negotiable /Set
Min.Order:100 Sets
1. The GMO multi-energy pressure-type water tank has been approved by Australian SAI, which is the highest requirement in the world currently accredited and has passed 250,000 pulse bearing tests with the standard of pressure of 0.15-1.0 Mpa, 30 times/minute.
2. The porcelain layer is uniform and flat with the thickness between 0.25 – 0.35 mm, the total defect less than 350 mm2 and no burn or shrinkage
The adherence performance is good, and silky screen is adherent with the adherence performance strength of 100N/mm2II
Acid, alkali, hot water resistance and sudden temperature change resistance;
The index of boiling water weight loss (enamel spoilage in the conditions of high temperature of 100°C for 42 days) is less than 3.0g/m2
The single-enamel standard protection current is far less than 22.5 mA/m2I
3. Ultra thick polyurethane overall foam, less than 9° C’s temperature drop for 24 hours (at the ambient temperature of 20°C and in the standard atmospheric pressure) |