Eccentric-ball Butterfly Valve
USD $1,000 - $10,000 /Set
Min.Order:1 Set
Eccentric-ball Butterfly Valve
Description
The traditional butterfly valves can’t be used for media with high pressure(normally not higher than 2.0MPa);and traditional valve is sensitive to media with impurities,the impurities may plug in or twine the sealing face,and then result the butterfly valve can’t open or close or result the valve lost sealing function,or damage sealing face.
Eccentric-ball butterfly valve solves traditional butterfly valve’s weakness mentions above.
This eccentric-ball butterfly valve uses a special sealing method:eccentric sphere to shaft-direction floating tube shape end face.This method completely solves weakness of traditional butterfly valve.This eccentric-ball butterfly valve structure dimensions is same traditional butterfly valve,manufacturing cost is almost same,and occupy small area,convenient to open and close,excellent sealing performance,have long lasting working life,and applicable for media(like water,oil,gas,etc.,) with high pressure,high flow rate,high concentration impurity,it is an ideal updated and substituted valves.
Eccentric-ball butterfly valve Structure and Features
1 Eccentric-ball butterfly valve components and structure
Features
1 Free leak for Bidirections.
2 No abrasion,no deactivation,no strain to Sealing face
3 sealing face with self-cleaning function
4 valve seat sealing face is welding pure nickel.wedge of Metal seat eccentric-ball butterfly valve is hard alloy,has good running-in effectiveness.Wedge of resilient seat eccentric-ball butterfly valve is covered by NBR.and Shaft packing is flexible graphite.
Structures
Eccentric-ball Butterfly Valve
Eccentric-ball Butterfly Valve Materials
Serial No | Component name | Materials | Materials Code | ||
Metal seat | Resilient seat | Metal seat | Resilient seat | ||
1 | Valve body | Ductile iron | Ductile iron | QT450-12 | QT450-12 |
2 | Wedge | Ductile iron+welded hard alloy at sealing face | Ductile iron +NBR | QT450-12 | QT450-12+NBR |
3 | Valve shaft | Stainless steel | Stainless steel | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
4 | Partial bearing | bronze | bronze | QSn6.5-0.1 | QSn6.5-0.1 |
5 | Bottom cover | Carbon steel | Carbon steel | 45 | 45 |
6 | Special-shape Spring | Alloy steel | Alloy steel | 60Si2Mn | 60Si2Mn |
7 | Valve seat | Ductile iron+welded pure nickel at sealing face | Ductile iron+welded pure nickel at sealing face | QT450-12/Ni | QT450-12/Ni |
8 | Shear pin | Stainless steel | Stainless steel | 1Cr18Ni9Ti | 1Cr18Ni9Ti |
9 | Shaft sleeves | Bronze | Bronze | QSn6.5-0.1 | QSn6.5-0.1 |
10 | Packing | Flexible graphite | Flexible graphite |
|
|
11 | Gland | Ductile iron | Ductile iron | QT400-10 | QT400-10 |
Dimensions