Fully Automatic Machine To Make Food Containers With Robot Hand introduction: 

The Fully automatic Machine To Make Food Container With Robot Hand mainly including three main parts:
1.PS foam sheet extruder: make PS foam sheet from raw material
2.Fully auto forming and cutting machine: make PS sheet to finished products, such as PS foam tray, PS foam box etc (we can design mould according to customer requirements)
3.Plastic recycle machine: recycle waste products to granules, the can mix with new material and put into PS foam sheet extruder again

A.PS/PSP(Polystyrene) Foam Sheet Machinery:

PS/PSP(Polystyrene) Foam Sheet Machinery adopts Gentian type double-stage series high foam technology. The raw material is general polystyrene granule. In the extruding process, vesicant is injected at high pressure. After extruding, foaming, cooling, shaping and hauling off, it is winding to finished PS foam sheet rolls. After vacuum forming system, the finished PS foaming sheet can be made into variety of packaging container such as fast food box, aquatic plate, supermarket tray, cake tray, KT board, instant noodle bowl, foam tray etc. It is widely used in the packing of food, fruit, advertising, industrial products and so on. This equipment adopts high speed non-stop hydraulic filter changer and PLC controller, it is easy for operation. 

B. Fully Auto Forming And Cutting Machine With Robot Hand

Fully Automatic Vacuum Forming and Cutting Machine With Robot Hand is an all-powerful thermoforming machine with integrating vacuum forming and cutting off at the same time. It can be used for processing all kinds of plastic sheet. This machine adopts computer digital forming system, PLC mechanical and electronic integration self-control and touch screen control working program, it is easy to operate and has highly production efficiency. It has the features of dependable stability, large forming area, fast speed forming and highly automation.With different mold,our PS/PSP(Polystyrene) Fast food container Making Machinery can produce PS foam fast food container,PS foam tray,PS foam burger box,PS foam egg tray and so on.

Fully Automatic Forming And Cutting Machine With Robot Hand working by forming,cutting and stacking(trimming) at the same time. It has the features of saving labor, improving efficient,lowing labor intensity and reducing production cost. It adopts PLC controller and touch screen to control the working program. Two workers are enough for whole production line.
Fully Automatic Forming and Cutting Machine With Robot Hand is plastic sheet forming equipment in one step with following process:transporting sheet, heating, forming,cutting,stacking and winding waste edge.

C.PS recycling machine

PS Recycling Machine can process PS/PE/PP material and it is mainly used to recycle the high foam polystyrene and high foam polystyrene products. It is the ideal equipment to recycle the waste materials. It features compact structure and easy operation.

Some Advantage of our PS Foam Machinery

1.Our PS Foamed Machinery adopts high quality stainless steel refining made.The advantages are nonrust,wear-resisting, elegant surface ,fast and convenient feeding material, humanized operation,save labor cost and improve product capacity.

2.Our PS Foamed Machinery adopts international famous brand hydraulic part,through hundreds of strick testing. More than 80 countries years of using experience prove: this system using effect is reliable and safty, performance reaches to the world's advanced level. The advantages are light weight,small volume, small motion inertia, quick response,big power,low noise, wear well and high degree of automation.

3.Our PS Foamed Machinery adopts advanced vacuum forming technology, forming and shaping one-time finish. Not only guarante the product quality, but also improve the product capacity.The working table adopts high strength steel plate,through laser welding, it is big strength and high tenacity. The mould adopts aviation aluminium alloy through tens of process refining made. The advantages are high precision,high strengh, light weight, long using life, corrosion 

assistance, fatigue resistance etc.

4.Our PS Foam Machinery adopts advanced computer control, combining photoelectricity and machinery together. Achieve full automatic of stacking and driving. It saves labor and recource, improve the economic efficiency. The advantages are stacking neatly, accurate counting, reasonable design,advanced technology etc.

What is the features of our PS Foam Machinery?
1.Low cost,light weight,good rigidity,wide use
2.Heat preservation,waterproof.
3.Resist high temperature,prevent oil
4.Renewable resources
5.As the Soilless cultivation

We will service for you and  solve all the problem for you by 7*24hours:

1.We will arrange our professinal engineer go to your country to install and test the machine and train your engineers. 
2.Our salesman will be 7*24 hours online for you to solve any problems from your side.

3.We have been in this line for business for more than 20years.So we have abuundant experience of producing machine.
4.Our machine is hight quality.We are your trustable manufacturer of machine

5.Contact with us.We can provide you non-stop service with the pre-sale,sale and after sale service. Save your purchasing cost and maintenance costs

Outside Package:
Export standard packing.
Inner Package:
EPE stretch film with Wooden pacakge for long time ocean shipping.

Q1:How many countries have your machine been installed?

A2:Our machines have exported to many countries Such as:

Korea,Japan,Kazakhstan,Uzbekistan,Malaysia,Russia,Poland,France,Turkey,Thailand,Vietnam,Brazil,Columbia,Argentina,Costa Rica,Algeria,Nigeria,Malawi,Bolivia,Sudan,Jordan,Egypt,South Africa,etc.

Q2:How about the Visiting

A2: We are located in Longkou City,Shandong Province,China.

The nearest airport is Yantai Airport.You can transfer from Guangzhou ,Beijing or Shanghai airport to Yantai Airport.

We will pick you at the Yantai airport when you come to visit us.

Q3:Will you Test machine before placing order?

A3:We will make the machine running during your visiting to check the working condition.

And There are some client who bought our machine in our city,We will take you to their factory to check all working flow.

Q4:Will you conduct training for our staff here?

A4:Yes,We will arrange our professional engineers to install and test machine and train the buyer’s engineers.

Q5:What are your terms of payment?

A5:We accept T/T, L/C.Western Union and Cash.

Q6:What’s your contact way?

A6: Email: lewis At      Skype: lewis15863824208

  Whatspp: +86 15863824208           Wechat: lewis15863824208

   Website:               QQ: 15863824208