2.4G Touch Screen Remote Control RGB LED Bulb
USD $17.2 - $17.8 /Set
Min.Order:5 Sets
Shenzhen Scott Electronics & Technology Co., Ltd.
2.4G Touch Screen Remote Control RGB LED Bulb
I .Product Description
It is a high-performance RGB led touch remote bulb, adopting the most advanced PWM control technology, ,owning 640 thousand colors and 20 automatical changing modes to choose.
Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). No extra wiring installation, simple and convenient. Adopting imported led,and the power consumption of LED bulbs is 20% of the traditional incandescent lamp. The life span of LED bulbs is over 10 times longer than the fluorescent lamp. Easy to install, use. safe and stable.
The forged and stamped aluminum lamp body,to the maximum extent,successfully solves the heat sink trouble by air backflow with increasing more fins.Cover of led bulb is made of PC and nanometer coolant,light transmittance over 85%,light transmits evenly.
With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.
The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .
LED bulbs with lamp base E26/E27/B22(optional) are widely used in KTV, bar,etc.
V.Programming(code clearing and code matching )
Code matching :
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
Confirm correct connection between the bulb and the power.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED bulb blinks twice slowly when it is done.
Code clearing :
The code can be cleared as needed.
The kit (remote and bulb) will stay in the original state after code clearing.
It can work when code rematching is done.
Please follow the below instructions:
Also, confirm correct connection between the bulb and the power.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED bulb blinks nine times swiftly when it is done.