500W12V40A switch power supply,CE apprived,DC12V40A
USD $27.52 - $27.59 /Piece
Min.Order:1 Piece
Shenzhen Scott Electronics & Technology Co., Ltd.
150W Dual Output Switching Power Supply;88 ~ 264VAC input;12V/150W output, CE and ROHS approved
200W Dual Output Switching Power Supply;88 ~ 264VAC input;5V/200W output, size:199*110*50mm
200W Dual Output Switching Power Supply;88 ~ 264VAC input;12V/200W output, size:199*110*50mm
350W Dual Output Switching Power Supply;88 ~ 264VAC input;12V/350W output, CE and ROHS approved
1) Features:
2) Switching Power Supply 24V 500W SP-500-24 Specification:
MODEL | SP-500-24 | |
OUTPUT | DC VOLTAGE | 24V |
RATED CURRENT | 20A | |
CURRENT RANGE | 0 ~ 20A | |
RATED POWER | 480W | |
RIPPLE & NOISE (max.) Note.2 | 240mVp-p | |
VOLTAGE ADJ. RANGE | 20 ~ 26.4V | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±0.5% | |
SETUP, RISE, HOLD TIME | 1500s, 50ms, 24ms | |
INPUT | VOLTAGE RANGE | 88 ~ 264VAC 124 ~ 370VDC |
FREQUENCY RANGE | 47 ~ 63Hz | |
POWER FACTOR | PF>0.95/115 PF>0.95>240VAC at full load | |
EFFICIENCY (Typ.) | 85.5% | |
AC CURRENT | 7A/115V 3.5A/230V | |
INRUSH CURRENT (max.) | 18A/115V 36A/230V | |
LEAKAGE CURRENT | <3.5mA / 240VAC | |
PROTECTION | OVERLOAD | 105 ~ 135% of rate load |
Protection type: Fold back current limiting, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 27.6 ~ 32.4V | |
Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||
FAN CONTROL,O.T.P. | RTH1 or RTH2≥50ºC FAN ON,≤45ºC FAN, ≥70ºC output shut down | |
FUNCTION | REMOTE CONTROL | RC+/RC-:Short = power on; Open = power off |
ENVIRONMENT | WORKING TEMP. | -10 ~ +50ºC, 20 ~ 90% RH non-condensing |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |
TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY & EMC(Note 4) | SAFETY STANDARDS | Design refer to UL1950, TUV EN60950-1 |
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |
HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |
EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,Light industry level,criteria A | |
OTHERS | MTBF | 133.4K hrs min. MIL-HDBK-217F (25ºC) |
DIMENSION | 170*120*93mm (L*W*H) | |
PACKING | 1.82Kg, 10pcs/19.53Kg/0.0326CBM | |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |