European cable distribution boxes

DFW10-12N/630/250
DFW10-12N/630/250 European Cable Distribution Boxes

1,Outline
 T-connector (European) cable distribution boxes are widely used in recent years in the electricity distribution network cable system engineering equipment, its main feature is a two-way door, use insulated wall bushing as the connection busbars, with a small length cable arrangement clearly three core cable without large span crossing and other significant advantages. Generally use the rated current 630A bolted connection cable connector, cable connector used in line with DIN47636 standards.

2,Type meaning

3,Normal conditions of use
1  No more than 3000m above sea level

5,Structural features 

1,Bolts: The T-head fixed on the base casing;

8, cable adapters: You can adjust different sections of the outer diameter of the cable insulation, electrical stress control;

9, grounding eye: connect the ground wire, grounding the shield;

10, the outer shield: outer semi-conductive layer, so that the joint outer shield and make sure the outside to the low potential;

11, metal crimp terminals.

 Compliance with VDE0278, IEC60502-4, EDFHN52-5-61, BS7215 standard

 

6,Specification

1,Equipment casing             2, before fitting touch

3, wiring lug                             4 studs

5, touch fittings                        6, middle connector

7, insulating plug                     8, flat pad map

9, spring pad map                  10. Nuts

11, protective cap                  12 test caps

13, stress cone                     14, cable (branch)