Product Details

Coal fired chain grate threaded fire pipe hot water boiler

1.The boiler is single return screwed pipe,arched tube plate,and aerofoil flue,which shall make quasi-steel resistance of the shell to change into quasi-steel,avoiding tube plate crack due to high temp.

2.The rational design of cycle scrap,shall prevent the bottom of the shell from being heated & swelling.Water circulation reliabilities shall be improved by installing supply water injectors,avoiding the ash deposition of water-wall tube.So the reliablie combusion equipment shall ensure the normal operation of the boiler.

3.The optimization of boiler type shall decrease the size of boiler body,reducing the cost of boiler house 30%.

4.Because of excellent combustion efficiency,automatic coal supply,automatic slag-removal,the labor intensity of the stoker shall be reduced.

Model/Parameter/Item			DZL1.4- 0.7-95/70-AII	DZL2.8- 0.7-95/70-AII	DZL4.2- 1.0-115/70-AII
Rated capacity		MW	1.4	2.8	4.2
Operation pressure		Mpa	0.7	0.7	1
Hot water temp.		C	95	95	115
Water-inlet temperature		C	70	70	70
Heating efficiency		%	76	76	78
Area of stoker		m2	3.04	5.14	7.4
Heating area		m2	12000	24000	36000
Water inlet & outlet Diameter		mm	PN1.6 DN100	PN1.6 DN125	PN1.6 DN150
Fuel	Coal available		II type bitumite,lcv:17700-21000KJ/kg
Fuel	Consumption	kg/h	290	580	960
Dimension of biggest parts for shipment (LxWxH)		m	5.822.263.22	6.512.63.52	7.52.93.5
Weight of biggest parts for shipment		t	19.1	26.5	31
Overall dimension of Assembled boiler (LxWxH)		m	6.52.554.53	7.54.05	7.94.54.4
Water pump	Model		IS80-65-160	IS100-80-160	IS125-100-200B
	Flow	m3/h	50	100	172
	Lift	m	32	38	37
	Motor power	kw	7.5	15	30
Blast fan	Model		G6-41-13No 5.4A	G6-41-13No 6.4A	G6-41-13No 7.1A
	Flow	m3/h	4358-2310	7358-3596	10354-5349
	Pressure	Pa	994-1254	1436-1181	2270-1697
	Motor power	kw	3	5.5	7.5
ID fan	Model		Y6-41-13No 5.4C	Y6-41-13No 7.1C	Y6-41-13No 10C
	Flow	m3/h	8901-4350	15219-8171	32144-16607
	Pressure	Pa	2568-3240	2454-3283	2574-3444
	Motor power	kw	11	22	37

SZL coal fired hot water boiler

1.The boiler shall adopt double drum,monolayer arrangement,compact structure,as well as large heating surfaces which are more 10% than those of same kinds of products,featuring the following advantages such as sufficient output,safe and reliable operation,short construction period,low installation cost ect.

2.The design of cyclone reburning chamber in furnace resulted in the decrease of dust contained in the flue gas.At the same time,incandescent carbon black particles shall burn further,enhancing the boiler thermal efficiency,decreasing gas blackness,as a result,the gas emission concentration shall meet the requirements of grade A environmental protection area.

3.The grate shall employ the technology patent of small roller structure,boundary grate and so on,improving the operation reliability of the boiler.

4.Since the adoption of technology patent for the sealed wind chamber and bilateral grate air register,and the application of machining cone seal structure to grate adjusting air eauipment,the sensitivity of the grate shall be improved.

Model/Parameter/Item			SZL4.2- 1.0-95/70-AII	SZL5.6- 1.0-95/70-AII	SZL7.0- 1.0-95/70-AII	SZL10.5- 1.25-150/90-AII	SZL14- 1.25-150/90-AII
Rated capacity		MW	4.2	5.6	7	10.5	14
Operation pressure		Mpa	1	1	1	1.25	1.25
Hot water temp.		C	95	95	115	150	150
Water-inlet temperature		C	70	70	70	90	90
Heating efficiency		%	78	79.6	78.7	80.8	81.7
Area of stoker		m2	7.15	8.6	11.72	16.4	18.9
Heating area		m2	36000	48000	60000	90000	120000
Water inlet & outlet Diameter		mm	PN1.6 DN150	PN1.6 DN200	PN1.6 DN150	PN1.6 DN200	PN1.6 DN200
Fuel	Coal available		II type bitumite,lcv:17700-21000KJ/kg
Fuel	Consumption	kg/h	900	1280	1450	2460	3240
Dimension of biggest parts for shipment (LxWxH)		m	7.623.273.46	8.823.343.46	7.783.383.53 83.52.7	9.053.353.69	10.593.353.69
Weight of biggest parts for shipment		t	31	45	28/27	24	27
Overall dimension of Assembled boiler (LxWxH)		m	8.44.93.92	9.385.333.86	9.85.26	12.35.37.2	14.225.38.04
Total weight		t	36	53	95.3	108	116
Water pump	Model		IS125-100-200B	IS125-100-200	IS125-100-200
	Flow	m3/h	172	200	240
	Lift	m	37	50	37
	Motor power	kw	30	45	55
Blast fan	Model		G6-41-13No 7.1A	G6-41-13No 8.5A	G6-41-13No 8.5A	TG15-1	TG20-1
	Flow	m3/h	10354-5349	19369-18137	19369-18137	23000	32079
	Pressure	Pa	2270-1697	2535-3391	2535-3391	1960	2559
	Motor power	kw	7.5	18.5	18.5	18.5	30
ID fan	Model		Y6-41-13No 10C	Y6-41-13No 11.2D	Y6-41-13No 11.2D	TY15-2	Y280S-4
	Flow	m3/h	32144-16607	41773-21578	41773-21578	40000	54520
	Pressure	Pa	2574-3444	2764-3697	2764-3697	3038	3236
	Motor power	kw	37	45	45	55	75