Automatic Pump Control |
The Electronic Controller orders the automatic start and stop of the water pump when opening or closing any tap or valve of the system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pumps operation. | Voltage: | 220 - 240V | Maximum Current: | 10 Amp | Restarting Pressure: | 1.5 Bar or 2.2 Bar | Maximum working Pressure: | 10 Bar | Connection: | 1" | Protection Rating: | IP 65 | Maximum Temperature Rating: | 100°C | Manual Start Switch | RESET | Tension LED | POWER | Pump Working LED | ON | Security System LED | FAILURE | Special Non Return Valve to avoid surges | Security System removing the possibility of the machine working without water |
|
|
1.Electric swith used in water systems,start and stop the pump automatically
2.Examine the water automatically,stop the pump in the case of water shortaget,protect the pump from damage caused by dry-running
3.Completely replaced traditional pump control system composed of pressure switch,pressure tank and check valve,etc