4S1P 14.8V/2.6Ah Li-ion rechargeable battery pack with PCB use with Sanyo UR18650ZY or Samsung 18650-26JM/HM/FM for LED light
USD $15 - $19.5 /Piece
Min.Order:1 Piece
Shenzhen UNIS Technology Co., Ltd.
4S1P 14.8V/2.6Ah Li-ion rechargeable battery pack with PCB use with Sanyo UR18650ZY or Samsung 18650-26JM/HM/FM for LED light
Skype:SZUNIS1
Model:SZUNIS 4S1P Li-ion battery pack | |||
Item | Specification | Remark | |
Nominal capacity | 2600mAh | 0.5C discharge Cell: 18650 | |
Nominal voltage | 14.8V | 3.7V / 1Cell | |
Charging voltage | 16.8V±0.05V | 4.2V / 1Cell | |
Charging method | CC/CV | (Constant-current and -Voltage with Limited current | |
Standard charging time | 1000mA/3hour,2000mA/1.5hour | Battery capacity÷charging current×1.5 | |
charging current | 1300mA(0.5C) | 0 ~ +40℃ | |
Maximum charging current | 2600mA(1C) | 0 ~ +40℃ | |
Continuous discharge current | 2600mA(1C) | -20 ~ +60℃ | |
Discharge cutoff voltage | 7.2V | 2.4V / 1Cell | |
Short circuit protection | Exterior short circuit | Automatic recovery | |
Internal resistance | ≤200mΩ | AC Impedance 1kHz | |
Cycle life | ≥500 | ||
Operating temperature | Standard Charge | 0 ~ +40℃ | |
Standard Discharge | -20 ~ +60℃ | ||
Outline dimension | L74*W19*H75mm | Length x wide x height | |
Pre-wired | Red = Positive,Black = Negative | ||
Protection Circuit Module:PCM-Li03S5-061 | |||
Maximal continuous charging current | 2A | ||
Maximal continuous Discharging current | 2A | ||
Over-charge detection voltage | 4.35V±0.025V | single cell | |
Over-charge release voltage | 4.15V±0.05V | single cell | |
Over-charge detection delay time | 0.5S—1.5S | single cell | |
Over-discharge detection voltage | 2.40V±0.08V | single cell | |
Over-discharge release Voltage | 3.0±0.10V | single cell | |
Over-discharge detection delay time | 50—150mS | single cell | |
Over-current detection | 6±2A | can adjust | |
Over-current delay time | 5—15mS |
Model:LY-L04S001-5 | |||
Item | Specification | Remark | |
Nominal capacity | 2600mAh | 0.5C discharge Cell: 18650 | |
Nominal voltage | 14.8V | 3.7V / 1Cell | |
Charging voltage | 16.8V±0.05V | 4.2V / 1Cell | |
Charging method | CC/CV | (Constant-current and -Voltage with Limited current | |
Standard charging time | 1000mA/3hour,2000mA/1.5hour | Battery capacity÷charging current×1.5 | |
charging current | 1300mA(0.5C) | 0 ~ +40℃ | |
Maximum charging current | 2600mA(1C) | 0 ~ +40℃ | |
Continuous discharge current | 2600mA(1C) | -20 ~ +60℃ | |
Discharge cutoff voltage | 7.2V | 2.4V / 1Cell | |
Short circuit protection | Exterior short circuit | Automatic recovery | |
Internal resistance | ≤200mΩ | AC Impedance 1kHz | |
Cycle life | ≥500 | ||
Operating temperature | Standard Charge | 0 ~ +40℃ | |
Standard Discharge | -20 ~ +60℃ | ||
Outline dimension | L74*W19*H75mm | Length x wide x height | |
Pre-wired | Red = Positive,Black = Negative | ||
Protection Circuit Module:PCM-Li03S5-061 | |||
Maximal continuous charging current | 2A | ||
Maximal continuous Discharging current | 2A | ||
Over-charge detection voltage | 4.35V±0.025V | single cell | |
Over-charge release voltage | 4.15V±0.05V | single cell | |
Over-charge detection delay time | 0.5S—1.5S | single cell | |
Over-discharge detection voltage | 2.40V±0.08V | single cell | |
Over-discharge release Voltage | 3.0±0.10V | single cell | |
Over-discharge detection delay time | 50—150mS | single cell | |
Over-current detection | 6±2A | can adjust | |
Over-current delay time | 5—15mS |