Specifications

UHMWPE plastic sheet
1.no water absorption
2.super wear resistant
3.self-lubricating
4.many size in stock

  Impact Resistance UHMW-PE products pe double color plastic sheet

1. Advantage

1.Abrasive resistance which always have in thermoelectricity polymer.

2.Best shock resistance even in low temperature.

3.Low frictional factor, and well sliding bearing material.

4.Lubricity( no caking, in adhesion) .

5.Best chemical corrosion resistance and stress craze resistance.

6.Excellent machinery process ability .

7.Lowest water absorption(<0.01%) .

8.Paragon electric insulativity and antistatic behavior .

9. Nice high energy radioactive resistance.

10.Density is lower than other thermoplastics (< 1g/m3).

11.Long using temperature range: -269°C--90°C.

2.Main characteristics:

The main performance comparison

High abrasion resistance

Materials	UHMWPE	PTFE	Nylon 6	Steel A	Polyvinyl  fluoride	Purple steel
Wear Rate	0.32	1.72	3.30	7.36	9.63	13.12

Good self-lubricating properties,low friction

Materials	UHMWPE -coal	Cast stone-coal	Embroidered  plate-coal	Not embroidered plate-coal	Concrete coal
Wear Rate	0.15-0.25	0.30-0.45	0.45-0.58	0.30-0.40	0.60-0.70

High impact strength, good toughness

Materials	UHMWPE	Cast stone	PAE6	POM	F4	A3	45#
Impact  strength	100-160	1.6-15	6-11	8.13	16	300-400	700

 

3.Sheet Size Available:

Dimensions:	Typical Thickness:
3000mm*1000mm	5mm-250mm
3000mm*1500mm
2000mm*4000mm
4000mm*1200mm
1200mm*3000mm

 

 *If required,also available in thickness from 1mm-250mm.

 

4.Technical parameter 

Subject	Unit	Paraters
Tensile strength	Mpa	>30
Compression strength	Mpa	≥41.8
Bending strength	Mpa	≥32
Impact strength	KJ/m²	≥140
Ball identation strength	N/mm²	≥40.8
Surface resistivity	Ω	4.9×10¹³
Water absorption	%	0.0001
Relative  waer rate	G/cm²	≤0.09
Frication coefficent	%	<0.09

 

5.Main Products show