HDPE plastic idler applicator roller
USD $3 - $50 /Piece
Min.Order:10 Pieces
Tangyin Sanyou Engineering Plastic Co., Ltd.
Energy saving HDPE plastic idler applicator roller
1.Product Description.
SanYou Technologies is pleased to announce our newest product line High Density Polyethylene
Conveyor Rollers.
Our HDPE rollers offer many advantages over traditional steel rollers in a variety of environmental
condtions.
2.Characteristics.
(1).Low friction coefficient, waterproof, effective sealing system,
(2).High accurate steel pipes ensure the rollers with low vibration and noise.
(3).Multi-labyrinth seals achieve waterproof and dust proof.
(4).Adopt good bearing make sure the long lifetime, stable running and good quality.
(5).Stable running, good quality and attractive price.
(6)Excellent resistance to chemicals
(7)Good resistance to low temperature
(8)Excellent dielectric properties
(9)Good self-lubricate
(10)Non toxic,light weight
3.HDPE ROLLER COMPONENTS.
4.Available in the following diameter.
Shell Diameter | Shaft Diameter at the Bearing | Bearing Series |
89 | 17mm/20mm | 6203/6204 |
102 | 20mm/25mm | 6204/6205 |
108 | 20mm/25mm | 6204/6205 |
114 | 20mm/25mm | 6204/6205 |
127 | 20mm/25mm/30mm | 6204/6205or6305/6206 |
133 | 20mm/25mm/30mm | 6204/6205or6305/6206 |
140 | 25mm/30mm | 6205or6305/6206 |
152 | 25mm/30mm/35mm | 6305/6206or6306/6207 |
159 | 30mm/35mm/40mm | 6306/6207/6308 |
165 | 35mm/40mm/45mm | 6206or6306/6207/6309 |
Applications:Suitable for use in a wide variety of applications and productssuch as cement,coal,gravel,fertilisers,ports,chemicals,quarrying,zinc mining,grain. |
RollerDiameters: 9mm,102mm,108mm,114mm,127mm,133mm,140mm,152mm,159mm,165mm.
(other sizes available on request)
Shaft:(mild steel/stainless steel)
Seal:Triple Labyrinth Seal
Bearing Type: SKF,FAG,NTN.(other brands available on request.
5.The package and The Storage.
6.The testing.
The dust test:
In this setup, the dust test is performed on our SYHDPE roller. After 200 hours nonstop running, there was absolutely
no dust detected in the grease of the bearing.
The water test:
During the water test, we let the SYHDPE roller run for 72 hours continuously while water was sprayed on the sealing.
After those 72 hours, there was absolutely no water in the labyrinth sealing and the HDPE tube.
The rolling resistance:
Also, the rolling resistance of the RQ + roller is measured. This is done at a speed of 600 rev / min with a radial load of 250 N. The measured rolling resistance was only 0.96 N.
7.Application Fields:
1.Chemical Industry
2.Fertilizer, Salt, Sugar, Pulp Paper, Acid and Alkaline, etc.
3.General Industry
4.Coal Mining, Cement, Concrete, Limestone and Quarry, etc.
5.Operating Condition.