Hot Sale 8 Wrap Coils New Beginner Liner Shader Gun Tattoo Making Machine

Introductions:
Have you ever envied someone with a colorful and unique tattoo? Do you want to mark your skin with a trendy and funny tattoo to show your personality? This Tattoo Machine is a good helper for people who seeks personality and perfection. With stable performance, it can work for a long time at a stretch without heat. Adopting high-tech electronic components, it is reliable for long-term use. It is easy to carry, because it is small and lightweight. Mark your skin from now on!

Features:
1. New and high quality
2. Beautiful appearance, special surface treatment
3. Come with a 8 wraps manual coil
4. Coil using the latest technology, ten high quality laps solenoid valve
5. This tattoo machine is a pro-quality beauty product with everything you'll need to tattoo
6. The best for beginner

Specifications:
1. Model: HB-WPT094
2. Frame Material: Low-carbon Steel
3. Construction: Stamping Process
4. Recommended Use: Multi-use (Liner or Shader)
5. Coils: 8 Warps Coils; 1.26"(32mm)
6. Working Voltage: 6-8V
7. Starting Voltage: 3V
8. Running Speed: 2500 R/Minute
9. Capacitor: 47UF/ 50V
10. A-Bar Material: Pure Iron
11. Front Binder Material: Brass
12. Rear Binder Material:Brass
13. Spring Thickness :0.50mm Rear Spring & 0.50mm Front Spring
14. Color: Silver
15. Dimensions: 3.35 x 1.26 x 3.39 inch / 8.5 x 3.2 x 8.6 cm(L x W xH)
16. Weight: 6.03 oz/ 171g

Package Includes:
1 x  Tattoo Machine

Extra Info
Why the machine cannot start?
1.The elastic rod does not touch the contact point of the inclined spring plate: Loosen the screw of elastic rod, rotate down the elastic rod to the contact point, and then regulate the rod to the right position. Finally tighten the screw to lock the elastic rod.
2.The switch is off: Connect it to 220V AC power supply and turn on the switch. The indicator turns red.
3.Both of adjustable knob (VOLTAGE) and V meter hand are in "0": Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving and should stop at 10V-12V
4.The elastic rod touches the contact point of front spring so tightly that the machine cannot start and maybe will cause short circuit. Turn on the switch and the indicator turns green (No voltage): Loosen the screw of elastic rod, rotate up the elastic rod and then rotate it down to the contact point, and finally regulate it to the right position. Restart the power, the machine will be ok.
5.Disconnection: Check the foot switch and the plug to avoid disconnecting the cord from the joint position caused by careless jerk.
6.Broken wires: The wires be susceptible to damage while washing and sterilizing the tattoo machine, so please confirm the wires condition and have the broken ones welded before use.
7.Problems of plugs and foot switch: Turn on the switch and check whether the plugs of cord and foot switch are broken or not, when short circuit happens (green indicator). The damaged ones should be welded with electric welding rod.