The digital Z axis allows the marking head to access difficult areas or mark on several levels in one cycle. Available in various sizes.

• 50-250 mm Z axis for column-mounted product range

Equipment needed
Third axis board integrated into the e10 controller. Powers and controls the digital Z axis.
Interchangeable axis
Used on all SIC Marking dot peen & light-duty scribing systems with minimal adaptation.

Caracteristics

•  Sturdy design based on stepper motors and lead screw
•  Makes use of two industrial grade guiding rails
•  Dedicated adapter plate to fit all marking heads
•  Driven by third axis board integrated to the e10 controller
•  Only one connection required: to e10 controller
•  Advance speed : 50mm/s (2"/s)

 Advantages

•  Part markings on different levels in same operation
•  Can avoid obstacles in the marking area
•  Allows displacement marking head for part removal
•  Compact and easy to integrate, reducing integration costs
•  Movement is controlled through e10 marking file, which avoids requirement for an external controller

Associated with the digital Z third axis, the integrated sensor, also known as "autosensing", ensures a pre-determined distance between the stylus and part. The autosensing feature enables automatic adjustment to different part heights. This option ensures perfect mark consistency, even with varying geometries or dimesional tolerances. A key feature to provide optimal read rates for machine readable marks (2D, Data Matrix codes, etc...).

Autosensing option associated with a digital Z-axis allows:

• Automatic detection of the part
• Automatic stylus to part positionning for optimal mark readibility

Advantages

• Maximal Dot-Peen Accuracy / Repeatability Ideal for Data Matrix code marking
• Positioning accuracy: + / - 0.05 mm
• Approach speed: 50 mm / second

Box with on / off buttons.Remote system start/stop

2.5 m connection cable to controller

Advantages :

• Can start marking cycles manually.
• Easy plugging

This option, available on any column, peen or scribing device, allows you to mark parts up to 35 kg and with a diameter up to 250 mm. It marks long parts (tube, ...) with a through chuck.
The control software is included.
 

Caracteristics

• 125 mm drill chuck
• Cable between the axis D and the marking controller
• Bits set for clamping parts on the inside:

    -maximum bore of the part 116 mm tight

• Bits set for clamping parts on the outside:

    -125 mm maximum diameter clamping

• Third axis chip for the controllermarking

This option, available for use with all e10 column-mounted dot-peen or scribing systems, allows marking of parts up to 35 kg and with a diameter of up to 250 mm.

• Pneumatic clamping for quick insertion / removal of parts - well suited for medium and large series. 
• A limited clamping stroke of 1.5 mm ensures maximum operator safety.
• Control software included.
• Only one connecting cable between the D axis and the marking system controller

Complete with 2 jaw sets:
Internal clamping jaws set: 116mm minimal internal diameter
External clamping jaws set:  130 mm maximal external diameter

Requires third axis board installed in e8 controller

Extended maintenance kits contain most common replacement parts for repairs or preventive maintenance, extending machine life

Kit maintenance box items:

• Dot peen stylus assembly (if dot peen machine)
• Origin detector
• Stylus
• Spring mechanism
• A set of drive belts (depending machine type)
• Vaseline oil lubricant (to be ordered seperately)

Attaches to marking system base.

Holds plate sizes up to 100x300 mm (4" x 12")

•  Quick and easy clamping
•  Provides constant, repeatable marks
•  Frees up operator during marking operation
•  Quick release for rapid change of part to mark