Specifications

1.Good flexibility and bond strength.
2.Good permeability.
3.Waterproof excellent.
4.Wide range of applications.

Geerda K11 General Waterproofing Coating

 

PRODUCT DESCRIPTION:                                                                                            

 

Geerda K11 general waterproofing coating is two-component waterproof coating. It adopts imported polymers as the main raw material, supplemented by a variety of additives. It has both the high elasticity of the organic material and the durability of the inorganic material. As a new generation of green waterproof material, it is widely used in the waterproofing engineering.

 

FEATURES:                                                                                                                     

 

Ÿ           Good ductility.

Ÿ           High elasticity.

Ÿ           Strong adhesion.

Ÿ           Simple operation, short construction period.

Ÿ           Can be paint on different kinds of moist and complicated bases.

Ÿ           Water-based coating, non-toxic and odorless, environment-friendly.

 

RECOMMEND USAGE:                                                                                                 

 

Wet or dry concrete, metal, fiber tile panels, masonry, asphalt, polyurethane, SBS, APP, roof, basement, interior and exterior wall, kitchen, toilet and bathroom, windowsill, pool, underground works, tunnels, bridges, reservoirs, etc.

 

CONSTRUCTION INSTRUCTIONS:                                                                              

 

 

1.      Before painting, the surface must be clean, dry, firm and smooth.

2.      Construction: Use rubber scraper or roll brush to paint, twice or three times,     the coating must be uniform.

3.      Before curing, the coating should be well protected, stop treading or putting heavy things on it.

 

 

USAGE:                                                   

 

1. Put the powder into liquid container.

2. Fully mixing until there is no precipitation.

3. Keep mixing to avoid precipitation during construction.

Reference Dosage:

Thickness (mm)	1.2	1.5	2.0
Dosage(Kg/M2)	2.0-2.3	2.6-2.8	3.2-3.5

 

 

 

 

Package & Storage                                                                                                        

 

—Package: two-component (Powder + Liquid)        

—Store at cool dry place. Avoid direct sunshine and freeze.  

 

Attention                                                                                                                          

 

Construction conditions:

Please don’t construct in wet season, rainy season and cold weather (temperature is ≤5°C and humidity is≥85%); otherwise, it will fail to reach the high quality paint film effect that this product should reach.

 

 

TECHNICAL INDEX:                                                                                                       

 

Project		Index
		I	II
Solids content  %  ≥		65
Drying time  H	Surface time    ≤	4
	Completely dry time  ≤	8
Tensile strength Mpa           ≥		1.2	1.8
Elongation at break%            ≥		200	80
Wet base surface adhesion strength Mpa   ≥		0.5	1.0
Low temperature flexibility    Ø100mm rod		-10°c No cracks	---
Non - permeable 0.3Mpa3min		Impermeable

 

 

 

 

 

Application: