BMH Model Single beam semi gantry crane
We can also supply the main crane components and full manufacturing drawings and full technical support, and your side manufacturing the beam structure in your country, that will save your sea freight and transportation cost.
-----------------Best Solutions Ready For Installation To Meet Individual Requirements
Working condition:
Working temperature: -25-50°C
Power supply: AC type 380V/3Ph/50Hz or by your actual demand
Working class: A3
BMH Model Single beam semi gantry crane is based on the MH type single girder gantry crane,
One side is gantry crane design and another side is overhead crane design.
It takes use of the Wall steel structure beams so could efficient to save the total cost of crane.
BMH model semi gantry crane is widely used with wire rope electric hoist, the lifting speed could be one speed or two speed; this semi gantry crane is a middle and small duty crane, could be controlled by ground control and remote control.
Crane Configuration:
Material: Steel plate material Q235 or Q345B ( similar international steel plate FE3 or FE52)
Steel structure: Strong Steel box type, seamless type, more strong and elegant beam.
Crane traveling motor: Soft start type
Wheel:Vacuum casting by our group, Inter medium frequency quenching
Main electrical parts: Schneider brand or Siemens brand.
1. Limit Switch: Safety limit switches for stoppers prevent over traveling in all motions.
2. Anti collision device
When two crane traveling on the same rail, the cranes will install the following devices:
Anti-collision device, Infrared non-contact and inductive type limit device
Sound and light alarm device, Wireless anti-collision device
3. Weight overload protection device
Includes automatic stopping type lifting weight limiter and weight display device.
4. Lifting limit switch and traveling limit switch
5. Emergency stop system
6. Electrical protection
The main insulation switch, emergency stop switch, short circuit, Zero voltage protection, loss of field protection, Current overload protection, over speed protection, zero position protection
Phase sequence protection and adopted crane specially anti- vibration contactor etc.
7. Interlock device
It sets interlock device for the cabin door and the other door from cabin into bridge structure, when the door is opened, the crane cannot work.
The general details of single girder Semi gantry crane | |||||
Span(rail to rail center) | 10m~20m or others | ||||
Cantilevers | N | ||||
Lifting height | 6m, 9m or other height | ||||
Capacity | 2t | 3t | 5t | 8t | 10t |
Lifting speed(m/min) | 8, 8/0.8 | 8, 8/0.8 | 8, 8/0.8 | 4, 4/0.4 | 7/0.7 |
Cross travelling speed(m/min) | 10 or 20 | 10 or 20 | 10 or 20 | 10 or 20 | 10 or 20 |
Long travelling speed(m/min) | 20, 30 | 20, 30 | 20, 30 | 20, 30 | 20, 30 |
Duty Class | A3/A4 | ||||
Power source | 380V, 50HZ, 3 phase (As your demand) | ||||
Working temperature | -20~40°C | ||||
Control model | Pendant pushbutton control or wireless remote control | ||||
Normal Quotations:
1. Lifting capacity ______ton
2. Single beam or double beam?
3. Standard type or Europe type?
4. Crane Span _______meters (Rail middle center to center distance)
5. Lifting height ______meters (Hook to ground)
6. Industrial voltage _____V, _____HZ, 3Phases
7. Control mode
A. Pendant control B. Remote control C. Cabin control
8. What material does the crane lift?
9. Do you also need us to supply bearing beam, rail and slide wire?
A. Yes B. No
10. Any special design demand on crane?