Chapter One:Technical Parameter

 1. Output paper: kraft paper, corrugated paper

2. Output weight: 90-150g/m2

3. Net paper width: 2400-2500mm

4. Design speed: 150m/min

5. Working speed: 80-120m/min

6. Capacity: 25-30 T/D

7. The gauge: 3200mm

8. Pressure type: pneumatic pressure device

9. Driving type: use AC frequency conversion,and driving by step

10. Machine design: squaring box type, including left and right hand machine, high speed running in

safe and safety environment.

11. Layout type: Headbox——fourdrinier wire part ——2 main pressing part ——1Φ2500mm dryer——

1Φ2500mm dryer—— 3 Φ1500mm dryers——sizing machine—— 6 Φ1500mm dryers——paper winding

machine ( right hand machine)

Chapter two: Technical design and requirement for the water, electricity, air

and vapor

1.Technical design: Pulping, paper making and processing equipment adopt one-stop process design.

This advanced design occupies small space for convenient operation and management. It has high

security and automatization degree, and can provide you high production with steady quality.

2.requirement for the water,electricity, air and vapor 

Requirement for the electrical source:

High voltage: AC10000V±10%

Low voltage: AC380V 220V±10%

Frequency: 50HZ±1%

Operated with compressed air:

Dielectric pressure: (aire supply)0.6-0.7Mpa

The highest temerature: 35°C

Quality: need filtrating

Working air pressure: above 0.6Mpa

3. Compressed air for the meter:

Dielectric pressure: 0.5-0.6Mpa

The highest temerature: 35°C

Quality: filtrated, unoiled and arefaction

Working air pressure: above 0.5Mpa

4. Branch water and primary water: clear and colorless water without sand, neutral PH scale.

5. Vapor:

working pressure: 0.3-0.4Mpa

Testing pressure: 0.8Mpa

Chapter three: the main equipment structure

1. Fourdrinier part: The length of fourdrinier part is 18m, vacuum couch roll Φ650mm×2300mm open

style headbox, inner is bordered with stainless steel, drave by two homogenate roll, macromolecule water board,macromolecule anti-grinding faceplate, suction box 8 pieces. Roll: none slot roll with

rubber covered. Frame:square frame is made of steel.

2. The press part: the main press 2, double, Φ 650mm×2850mm 4 stone rolls, Φ  600mm×2850mm 4

rubber rolls; shore hardness 95°±2, and pneumatic compression device(standard height and moderate

rubber roll)

3. The dryer part: Φ  2500mm×2850mm 2 dryer cans,Φ 1500mm×2850mm 9 dryer cans. arrangment

pattern(1+1+3+sizing machine+6), and pneumatic compression device. equipped with pneumatic guide

and electric mesh-fastener.

4. winding part: 2400mm cylinder winding paper machine and 2400mm rewinding machine.

5. Driving and controlling part: using of AC frequency conversion, and driving by step.

 Chapter Four: Paper making, pulping and auxiliary equipment

Raw material 

Paper-making flow charts

Related machines

Buying guide

To know well about your requirement and avoid misunderstanding , please check following information 

of  paper machine and feedback us your idea , we can make accurate quotation completely according

to your requirement : 

1.what kind of material you want to use ? 

(1)100% waste paper ; 

(2) waste paper mixed virgin pulp ; 

(3) wheat straw , wood , sugarcane bagasse ,wood pulp,bamboo.

2.how many tons do you want to produce per day ?(24hours) ;  

3.what kind of finished product you want ? 

(jumbo roll,toilet paper roll ,napkin paper,handkerchief paper,kitchen paper)

4.what is the output paper width of jumbo roll?(mm):

5.what is the the output paper weight(thickness)?(mm)

What we can provide:

1.787,1092,1575,1760,1880,2400,2640,2800,3200mm paper machine

2.paper egg tray machine

3.pulp making equipments

4.paper making equipments 

5.paper processing equipments

6.all kinds of spare parts

Best Service:

1.We will provide you all technical consultation and make the drawing and proposal for you.

2.We will send technicians to install and test the machine for you.

3.We will train skilled workers for you.

4.We will supply best pre-sale, after-sales service for you. 

Henan Province Qinyang Shunfu Paper Making Machinery Co; Ltd. was founded in 1988. We are specialized 

in the production paper making machinery, pulping equipment, paper egg tray making machine and paper 

processing equipment. Our products had been certificated by ISO9001 and exported to many countries, 

such as Uzbekistan, Russia, Kyrgyzstan, Nigeria, Ukraine, Botswana, Libya, Algeria, El Salvador, Lebanon, 

Moldova, Bolivia.

More detail information and scheme, please feel free to contact with me.