PPR-AL-PE composite pipe
USD $0.2 - $5 /Piece
Min.Order:1000 Pieces
Hebei Euroasia Industry Trading Co., Ltd.
PPR-AL-PE Plastic composite pipe
PPR-AL-PE Plastic composite pipe Features:
1. OSUN brand PP-R aluminum plastic composite pipes are consist of five layers. The middle layer is aluminum foil, connected with outer layer PP-R, inner layer is PP-R, PE or PERT.
2. There is imported heat glue which extruded by high temperature & high pressure.
3. Greatly reduced linear expansion efficient, only 1/4 of that of PP-R.
4. Clean, simply cut and weld, easy assemble.
5. Good temperature resistance: the maximum transient temperature is up to 110°C.
6. It is the more properer for indoor cold & hot water pipeline system.
7. High resistance of corrosion: anti-rust, no corrosion.
8. Low flow resistance through pipeline.
9. Higher flow capacity: smooth interior walls result in low pressure loss and high volume
10. Pipe connection fixed, no leakage, hot-melt connection apprance is good.
11. Healthy, Clean & No toxic: No heavy metal additives , would not be covered with dirt or contaminated by bacterium.
12. Easy installation: quick easy to assemble and install.
13. Heat preservation: low thermal conductivity result in preserving heat.
14. Longevity: more than 50 years under proper use( working temperature 70 °C ,working pressure PN 1.0MPa). Even more than 100 years under common temperature 20 °C .
15. Recycled and environment – friendly.
PPR-AL-PE Plastic composite pipe | |||
PN25(-400C~500C) | PN20 (-400C~1000C) | ||
DN (mm) | Thickness (mm) | DN (mm) | Thickness (mm) |
20 | 3.4 | 20 | 3.0 |
25 | 4.2 | 25 | 3.3 |
32 | 5.4 | 32 | 4.0 |
40 | 6.7 | 40 | 5.0 |
50 | 8.3 | 50 | 5.5 |
63 | 10.5 | 63 | 7.0 |
75 | 12.5 | 75 | 8.5 |
Welcome customers contact us for more information & quotation list.