The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.
ADVANCED TECHNOLOGY
Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.
Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.
Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.
NEW CYCLIC PULSING FUNCTION
In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator
Technical Parameters
AUTO PULSE DESULFATOR BENEFITS:
l Increases Battery Power
l Extends Battery Life
l Battery Charge Faster
l Longer Discharge
l Prevents Sulfate Build-up
l Reduces Evaporation
COMPETITIVE ADVANTAGES
l Fully Automatic voltage selection. 12V 24V 36V and 48V
l New Cyclic pulse generation method for improved capacity recovery
l “Soft” Peak Pulsing
l Auto cutoff function to prevent over discharge of battery
l User Configurable override for manual voltage selection:
MANUAL VOLTAGE SELECTION
If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select button. The LED screen will first display the working voltage and if you want to then alter the working voltage setting just press the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.
SPECIFICATION:
Size: 88*56*23mm
Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ
LED light indicates when pulse working
Cutoff amp: <5mA
| Display | Cutoff voltage |
12V battery | C12 | 11.0V |
24V battery | C24 | 22.0V |
36V battery | C36 | 33.0V |
48V battery | C48 | 44.0V |
