pvdc coated nylon film
USD $2.95 - $3.3 /Ton
Min.Order:1 Ton
Hangzhou Jinxin Filming Packaging Co., Ltd.
KPA / KNY – PVDC Coated BOPA / NYLON Film
Type No. KPA01
Typical Thickness: 17mic
Width ≤2100mm
Roll Diameter ≤780mm
Paper core ID: 76mm(3″),152mm(6″)
Regular Size: 17mic. 6000m/roll with 3″ paper core. The other size can be customized
Product type: Using BOPA / NYLON as the base film. The surface is coated with high resistance PVDC layer. It can be printed and laminated directly.
1. good carbon dioxide gas-barrier properties. 2. Excellent oxygen-barrier, nitrogen-barrier. 3. Excellent odor-barrier and peculiar smell-barrier properties. 4. Good water-barrier properties. 5. Good needling properties. 6. To be suitable for print. 7. Good low temperature. 8. heat-sealable and smooth seal.
Excellent thermoform ability characteristics. High level of transparency Excellent barrier properties against Moisture, Water vapor, Short wave UV radiation, Gases, Aroma Oils, Fats, etc. Optimum for meat vacuum packaging. High oil content foods(e.g.deep-friend peanut)packing. Tea packaging with aroma protection.
PROPERTIES | UNIT | TYPICAL VALUE | TESTING METHOD | |
---|---|---|---|---|
Thickness | μm | 17.1 | GB/T6672 | |
Units weight | g/m2 | 20.75 | YFSJ2009 | |
Yield | m2/kg | 48.2 | YFSJ2009 | |
Tensile Strenght | MD | Mpa | 160 | GB/T 13022 |
TD | Mpa | 170 | GB/T 13022 | |
Elongation at break | MD | % | 89 | GB/T 13022 |
TD | % | 37 | GB/T 13022 | |
Dimensional stability | MD | % | -1.5 | GB12026 |
TD | % | -1.0 | GB12026 | |
Seal Strength | MD | MPa | 159 | GB/T 13022 |
TD | MPa | 145 | GB/T 13022 | |
Haze | % | 3.0 | GB/T2410 | |
PVDC Coated Side Surface Tension | mN/m | ≥40 | GB/T14216 | |
WTR 38°C(100°F) 90%RH | g/ m2·24h | 5.6 | ISO 15106-3 | |
OTR 23°C(73°F) 0%RH | cm3/m2/24h | 7.8 | ASTM D3985 |
Important Notes:
1.Generally used as composite flexible packaging composite, insulation materials and high-end label film.Through the process control and increasing the thickness of the PVDC layer, the barrier properties can be further improved.
2.It is the responsibility of our customer to determine that the use of our product(s) is safe, lawful, and technically suitable in their intended applications. The Values given in the technical date sheet represent typical values based on the best of our knowledge as on date when the date was compiled. It is offered solely to provide possible suggestions for your own experimentation and not as guarantee for the material supplied. The user is solely responsible for the end use of the product and needs to perform their own tests to confirm the product suitability / compatibility in all respects. Zhengyi Packaging Film Gives no warranty or accept liability for any loss and fitness of the product for any specific purpose. And the Zhengyi Packaging Film reserves the right to change the technical date sheet at any time for enhancing the quality of the products without prior information.