Product Details

Product Description

8-Shaped Rebar Molding Machine

(Model:KZHD16B)

Introduction:

8-Shaped Rebar molding Machine is the important part of grid arch.(Grid arch is commonly used in highway, railway tunnel, and the initial support in mine roadway construction ) People from SKZ has been constantly dedicated to the development of the automatic rebar bending machine.We focus on the special shape and requirements of 8-Shaped Rebar molding Machine and make the original complex processing more simple, standard, efficient and energy saving. We truly understand many difficulties of the traditional processing and realize that advanced ideas and elements in modern manufacturing should be introduced into the design.

Description

1,Automatic wire feeding system ( CNC ).

2,High power feeding motor to ensure bending bar accuracy

3,8-Shaped Rebar molding Machine is the important part of grid arch

4,the product does not need human-powered transport,so that make our products a real sense of flow

5,The machine is equiped with automatic feeding device, which reduce labor and improve efficiency.

Production Process

Process

Station

Position

Machine

Technical requirements

Time

Bending and forming

One station

Operator

8-shaped bending machine

It requires to bend the steel into 8-shaped

15S

butt welding

8-shaped butt welding machine

Interface weld smoothly without dislocation

Pull welding in the middle

Two stations

Welder

Welding machine

Full Weld and achieve the specified welding length

15S

Forming

One station

Operator

Butterfly Bar hydraulic forming machine

Achieve specific shape and size

Welding

Two Stations

Welder

Welding machine

Fully welding both side,the dimensions of the four corners are allowed within the tolerance range.

30S

Instruction:According to the production process of this equipment, a pair of butterfly can be produced in every 30 seconds

Production Diagram

parameter

8-Shaped Rebar molding Machine		8-Shaped butt welding machine		Butterfly Bar hydraulic forming machine
Model	KZB16	Model	KZDH125	Model	KZDX100
Bending bar diameter	Φ14 Φ16	Butt welding bar diameter	Φ14 Φ16	Cylinder specifications	Φ100Χ200mm
Maximum feed speed	60m/min	Production efficiency	300/h	Nominal force	100KN
Production efficiency	200/h	Rated capacity	125KVA	Maximum stroke	200mm
Rated power	25KW	Maximum forging force	40KN	Maximum opening size	280mm
Working environment temperature	-5℃— 40℃	Maximum feeding schedule	40-50mm	Cylinder downstream speed	60mm/s
Cylinder Pressure	≤0.6MPa	Cooling water consumption	300L/H	Cylinder upstream speed	60mm/s
Dimension(LWH)	3150Χ1200Χ2000mm	Dimension(LWH )	1770Χ1655Χ1230mm	Working surface height	860mm
				Working surface size	590Χ300mm
				Hydraulic oil capacity	80L