Industrial autoclaves (also known as still kettle) are pressure vessels used to process parts and materials, which require exposure to elevated pressure and temperature. The manufacture of high-performance components from advanced composites often requires autoclave processing.

• Full-cell process
• The low & high frequency pressure law
• Double-racuum process

Full-cell process method to make preservative wood can be divided into the following stages:

close the tankdoor————turn on the air compressor-- start initial vacuum after the air compressor stop automatically————add pressure————discharge the liquid————final vacuum-- turn off the air compressor————restore air————discharge the rest liquid-————open the pressure tank door.

1.Body
A horizontal pressure equipment with electrical opening structure,there are heating element and cooling device inside,in the body also arranged circular duct and trolley track, the body is equipped with door opening safety interlock device, implement autoclave's door opening triple protection.

2.Control system
The system can be divided into two type:one is manual control system;another is auto control system,they can be equipped according to the user's requirement.

• Working pressure: -0.08MPa--3.6MPa
• Working temperature: normal temperature
• Vocuum degree(relative): 0.098MPa
• Capacity ( one time ): 2 / pot--20  /pot

• Preservative for wood
• Wood  being flame-resistant
• Wood  dyed

1. Wood  treatment equipment  control system --one kind of brand-new lumber preventer's intelligent control system. Operation ---simple, safe, reliable. The absorption medicament quantity for each cubic meter lumber can be measured accurately, and can examine the lumber medicament absorbing capacity to the standard without leaving the pot.
2. Treatment equipment with advanced Rubber sealing ring ,easy to install ,perfect sealing efficiency.
3. Automatic open door, two kinds of door ,one is side-opening ,the other is up-opening.

1. Wood treatment equipment apply to be preservation ,termite proof ,and to prevent fungal .Especially outdoor wood floor ,landscape floor ,outdoor wood platform ,and wood plank road ,and other preservative wood pergola.
2. This treatment equipment have special craft for wood ,such as :vacuum pressure method ,fullcell method ,high low frequency pressure as so on . Especially vacuum pressure method ,The preservative level can get C4.
3. You can use CCA and ACQ two kinds of preservative match our wood preservation equipment.
4. PLC is a new intelligent control wood preservative system ,which make the wood preservationequipment to be easy ,and to be safety ,to be reliable .Meanwhile ,Even if the wood don't be push out ,this can accurately calculate if the preservative is permeated in the wood.