sand washer supplier, sand washing plant, sand washing machine
USD $1,500 - $5,000 /Set
Min.Order:1 Set
Henan Xingbang Heavy Machinery Co., Ltd.
sand washer supplier, sand washing plant, sand washing machine
1. Brief introduction of Sand Washer
XS series sand washing machine are mainly used in building site, gravel plant, concrete dam building site of hydropower station, etc., and with features of high degree cleaning-up, reasonable structure, large capacity, low power consumption, small loss of the sands during the washing process, especially for that the drive parts of the sand washing machine are separated from water and sands. So the sand washing machine has lower failure rate than the usual sand washing machine. sand washer supplier, sand washing plant, sand washing machine
2. Operation of Sand Washer
The electric motor of sand washing machine runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water to the sand washing machine, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lifted up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task. sand washer supplier, sand washing plant, sand washing machine
3. Structure of Sand Washer
1). XS sand washing machine is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. sand washer supplier, sand washing plant, sand washing machine
2). When it is used for cleaning sand in quarries, sand washing machine has many advantages compared with the traditional spiral sand washing machine. sand washer supplier, sand washing plant, sand washing machine
3).Sand washing machine is of little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as “sand for construction” and “cobble and broken stones for construction”. sand washer supplier, sand washing plant, sand washing machine
4).There are no other wearing parts about sand washing machine except the screen mesh. sand washer supplier, sand washing plant, sand washing machine
5).Sand washing machine features long service life and few times for maintenance. sand washer supplier, sand washing plant, sand washing machine
4. Advantages of Sand Washer
1). This sand washing machine is of simple structure. The driving device of the impeller is separated from water dirt and sand, which greatly reduces the fault rate. sand washer supplier, sand washing plant, sand washing machine
2). Compared with traditional spiral sand washing machine, this sand washing machine has little loss of fine aggregate and sand. This sand washing machine has almost no wearing parts except screen cloth.
3). This sand washing machine enjoys long service life and free maintenance. sand washer supplier, sand washing plant, sand washing machine
Model | XS2200 | XS2600 | XS2900 | XS3500 |
Bucket wheel diameter | 2200mm | 2600mm | 2900mm | 3500mm |
Speed | 1-2r/min | 1-2r/min | 0.8-1.5r/min | 0.8-1.2r/min |
Treatment capacity | 15-30t/h | 20-50t/h | 50-100t/h | 120-200t/h |
power | 4.5kw | 5.7kw | 7.5kw | 11kw |
weight | 3300kg | 4600kg | 6100kg | 7900kg |
Size (L*W*H) | 3150x1910x2280mm | 3520x2390x2690mm | 3820x2390x2690mm | 4420x2930x3800mm |
XBM XS series sand washing machine is a bucket wheel washing equipment,this sand washing machine can clean sand and separate soil from the sand. the novel sealing structure, reliable transmission device,to ensure the effect of cleaning dehydration, so the sand washing machine is a high efficient sand washing equipment together used with the sand making machine. sand washer supplier, sand washing plant, sand washing machine
The sand washing machine is of simple structure, stable performance, the impeller drives bearing plant materials with water and isolated by water,much to avoid the bearing due to flooding,sand and pollutants cause damage to environment. sand washer supplier, sand washing plant, sand washing machine
Products must be inspected Strictly before selling; customers are invited to simulate and test sand washing machine on-the-spot and raise objections;in accordance with the agreements stipulated in the contract, we will arrange delivery. sand washer supplier, sand washing plant, sand washing machine
When the sand washing machine is working, electric motor makes the impeller rotates slowly with the help of V-belt, decelerator and gear. Sand and gravel are conveyed to the washing tank through feeder. They tumble and rub each other with the rotating of impeller to remove the foreign substance and destroy the vapor canopy wrapping the sand.The destroying of vapour canopy can facilitate the dehydration. At the same time, water added with high pressure will wash away the foreign substance and foreign body with low specific density to be discharged from over fall weir. then the washing is finished. Clean sand and gravel are taken to the outlet sank by impeller. sand washer supplier, sand washing plant, sand washing machine
Personalized reception: Offer the full and personalized service in the whole journey after you come to China.
Lifetime Technical Support: Offer one year of free equipment warranty and lifetime technical support.
Monitor Production Progress: You can monitor production progress personally any time after confirming the order.
Product Delivery: We have developed a long and good relationship with many shipping agents, such as APL, MSK, CSCL, MSC, etc.
Installation and Training: Send technicians to the client site for guiding the installation and adjustment, and training operators to complete the inspection and acceptance together with you.
More XBM service details please click here
Six Reasons of Choosing XBM: