Specifications

quick lime plant
1. CaO content: 85%-90%
2. fuel: coal, gas, petroleum coke, etc
3. energy saving
4. activity degree: 350

Introduce for quick lime plant :

 

1, Feeding equipment

After the raw materials mixing well by the proportioning belt,transported by elevator to the feeding device which is on the top of the kiln, by adjusting the rotation angle can be achieved 9 regional materials feeding work.

 

2, Material level control:

High efficiency energy saving mechanical shaft kiln are devided into low level and high level depend on the processing technology, achieved shaft kiln inside material level automatic reasonable control, material level keeps the kiln feed and discharging balance.

 

3,Discharging device

By using the disc cinder machine with two layers of sealed gate,it can make sure the discharging evenly and well sealed, then the kiln air supply can be stable.

 

4,Air-blasting equipment:

Use centrifugal blower supply air to bottom of kiln, to keep positive pressure at the bottom of kiln, and micro positive pressure at the top of kiln.

 

5,The function of the automatic control system

Our machines adopt PLD control system, own great monitoring in the shaft kiln ignition,making the feeding system smooth,stablizing the calcining zone,discharge air system etc.

 

Features of quick lime plant :

 

1. Different plant sizes available (50 TPD, 65 TPD, 75 TPD, 100 TPD, 150 TPD, 200 TPD and 300 TPD)

2. Use of alternative fuels like low volatile coal, petroleum coke, lignite etc.

3. Use of alternate raw materials like bauxite, laterite, iron ore, Lime, Sea Shells etc.

4. Better Kiln design to prevent radiation loss.

5. Fuel efficient technology.

6.Low capital Investment.

 

 

Specification of quick lime plant

 

Type	Kiln body size(mm)		Production capacity (t/h)	Rotate speed (r/min)	Motor power (kw)
	Diameter	Height
YL-2.2×8.5	2200	8500	5~6.5	0.99~9.98	11
YL-2.5×10	2500	10000	7~8.5	1.16~11.6	15
YL-2.8×10	2800	10000	9~10	1.16~11.6	15
YL-2.9×10	2900	10000	9.5~10.2	1.22~12.2	18.5
YL-3.0×10	3000	10000	10~11	1.22~12.2	18.5
YL-3.0×11	3000	11000	11~13	1.22~12.2	22
YL-3.2×11	3200	11000	13~15	1.26~12.6	22
YL-3.6×11	3600	10000	15~17	1.26~12.6	30

 

 

Our service for single shaft kiln

 

1. We offer technical support until the workers know how to operate.

2. We offer the technology data and relative files of shaft lime kiln . The operating Instruction will go to the customers with the equipment.

3. We provide lifelong guidance of shaft lime kiln .

4. Excellent easy-broken parts support for buyers.
5. Free training. You and your workers can come to our factory for free study, no matter if you will purchase from us.