Product Details

Lime rotary kiln producing in China

Henan XBM specialize in rotary kiln dryers,20 years experiences,professional design,first-class quality ,sales lead !

We offer rotary kiln dryers spare parts for free for the top five customers every month !

A. Value, high performance-price ratio

Lime Rotary Kiln dryers are commonly used for heat processing of minerals and aggregates.XBM Lime Rotary Kiln dryers can maintain a uniform product temperature at the kiln entry, mid zone and discharge to achieve consistent quality results. In most rotary kiln dryers, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently,our engineer pay more attention to the selecting of sensor,no matter the design, wavelength, and alignment. They are all very important considerations, has greatly increased the value and high performance-price ratio of our rotary kiln dryers.

B.Widely capacity meet differents clients' needs( Part technical parameters of XBM rotary kiln dryers for your reference)

Product specifications(m)	Kiln dimensions			Capacity(t/d)	Rotation speed(r/min)	Motor power(kw)	Total weight(t)	Note
Product specifications(m)	Diameter(m)	Length(m)	Obliquity(%)	Capacity(t/d)	Rotation speed(r/min)	Motor power(kw)	Total weight(t)	Note
2.5×40	2.5	40	3.5	180	0.44-2.44	55	149.61	Kiln with shaft cyclone preheater
2.5×50	2.5	50	3	200	0.62-1.86	55	187.37	----
2.5×54	2.5	54	3.5	204	0.48-1.45	55	196.29	----
2.7×42	2.7	42	3.5	320	0.10-1.52	55	198.5	----
2.8×44	2.8	44	3.5	400	0.437-2.18	55	201.58	Outside disassemble kiln
3.0×45	3	45	3.5	500	0.5-2.47	75	210.94	----
3.0×48	3	48	3.5	700	0.6-3.48	100	237	Outside disassemble kiln
3.0×60	3	60	3.5	300	0.3-2	100	310	Alumyte-alumina forge kiln
3.2×50	3.2	50	4	1000	0.6-3	125	278	Outside disassemble kiln
3.3×52	3.3	52	3.5	1300	0.266-2.66	125	283	Kiln with preheater precalcine
3.5×54	3.5	54	3.5	1500	0.55-3.4	220	363	Kiln with preheater precalcine
3.6×70	3.6	70	3.5	1800	0.25-1.25	125	419	Generating kiln for using ofterheat
4.0×56	4	56	4	2300	0.41-4.07	315	456	Kiln with preheater precalcine
4.0×60	4	60	3.5	2500	0.396-3.96	315	510	Kiln with preheater precalcine
4.2×60	4.2	60	4	2750	0.4-3.98	375	633	Kiln with preheater precalcine
4.3×60	4.3	60	3.5	3200	0.396-3.96	375	583	Kiln with preheater precalcine
4.5×66	4.5	66	3.5	4000	0.41-4.1	560	710.4	Kiln with preheater precalcine
4.7×74	4.7	74	4	4500	0.35-4	630	849	Kiln with preheater precalcine
4.8×74	4.8	74	4	5000	0.396-3.96	630	899	Kiln with preheater precalcine
5.0×74	5	74	4	6000	0.35-4	710	944	Kiln with preheater precalcine
5.6×87	5.6	87	4	8000	Max4.23	800	1265	Kiln with preheater precalcine
6.0×95	6	95	4	10000	Max5	950×2	1659	Kiln with preheater precalcine

C. Professional technical team guarantee the precise inclination

For example,the model 2.2x50 rotary kiln dryers demands the inclination is 4%, the rotation speed is 0.125-1.25r/min; the model 1.8x45 rotary kiln dryers demands the inclination is 3.5%, the rotation speed is 0.66-1.98r/min, the pricise inclination in order that the rotary kiln dryers can work smoothly.

D.The own characteristics of the rotary kiln

1. Good sealing

2. Less easy worn parts

3. Convenient maintenance

4. All instrument control, reliable operation

E.The structure and working principle of XBM Lime Rotary Kiln

Lime Rotary Kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion. Cylinder as heated pivoting part, made of high quality carbon steel plate, is supported on the support device by tire, and there is mechanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. To prevent cold air come in and dust overflow, the reliable kiln tail and head sealing equipment is installed on feed and discharge end. so that the cylinder of the

The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the rotary kiln dryers rotates,material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing.

F.More details of the XBM Lime Rotary Kiln

Brief introduction of XBM Lime Rotary Kiln : rotary kiln dryers is mainly used for metallurgy, building materials, ores and other mineral materials, heating and calcining. Such as ceramic sand, bauxite, limestone, cement, fly ash magnesium aluminum hydroxide, aluminum products, alumina refractory materials such as mineral particles and the heating and calcined powder.

Lime Rotary Kiln can be divided into lime kiln, metallurgy chemical kiln and cement kiln according to different materials. Lime kiln is used for baking active lime and dolomite in the steel factory and ferroalloy factory.Cement kiln is used for making of cement clinker and there are dry and wet methods to make cement. Metallurgy chemical kiln is used for magnetic roasting of iron ore and oxidizing roasting of chrome and nickel in the steel factory; baking high-alumina mine in the refractory material factory; baking chamotte and alumina in the aluminium factory and baking chrome ore and chrome powder in the chemical plant.

G. Have authority certifications

H.The safety of the packaging and delivery

After we signed the purchase contract and have a certain reputation guarantee, we will contact the professional group that responsible for ship bookings, commodity inspection, commercial invoices, packing list, insurance policy and so on, in order to provide you the perfect goods trading services, until the active lime rotary kiln dryers you purchased properly to your hands.

I.The clients sites of our Lime Rotary Kiln

Kindly note:Please Inform us the follow figures:1).feeding material 2).Feeding material MAX. Size (mm) 3).Final mesh size (mm) 4).Capacity (t/h)

Personalized reception: Offer the full and personalized service in the whole journey after you come to China.
Lifetime Technical Support: Offer one year of free equipment warranty and lifetime technical support.
Monitor Production Progress: You can monitor production progress personally any time after confirming the order.
Product Delivery: We have developed a long and good relationship with many shipping agents, such as APL, MSK, CSCL, MSC, etc.
Installation and Training: Send technicians to the client site for guiding the installation and adjustment, and training operators to complete the inspection and acceptance together with you.

More XBM service details please click here

Six Reasons of Choosing XBM:

International high quality certification product chain
Manufactures, more reasonable price
Solid technical support and after-sales service
Uphold the principle of “Customer Supreme”(Balance payment after equipments run normally)
One-stop service, customized exclusive project feasibility report
Exports more than 50 countries and regions, good customers feedback