vertical  shaft lime kiln is mainly used for metallurgy, building materials, ores and other mineral materials, heating and calcining. Such as ceramic sand, bauxite, limestone, cement, fly ash magnesium aluminum hydroxide, aluminum products, alumina refractory materials such as mineral particles and the heating and calcined powder.  

  1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating device.
2. Catch wheel: including mechanical wheel and hydraulic pressure catch wheel.
3. Gears: single or double. The rotating speed is controlled by regulating motor, DC motor or variable frequency and speed regulation motor. Be reliable, energy-saving and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed, zoom and floating. Its structure is simple, replacement is convenient and it won’t hurt cylinder when it needs a change.
5. Kiln head hood: including stationary type and flexible type.

  On the top of the preheater is a bunker with level indicator to control the height of feed layer; the bunker is connected with the preheater by a sliding feeding pipe, and the dolomite will be transported into preheater through this pipe, in addition the pipe could seal the material and prevent cold enter into the preheater. After row material enter into the preheater, take advantage of the hot flue gas released after caclining to backward flow towards feeding direction, have a full heat exchange to make the materials preheated uniformly, then the material will be pushed into kiln by means of every hydraulic push rod to shorten the calcining time of material in the kiln, so as to reduce heat consumption and save coal, effectively reduced production cost. The gas released after heat exchange will be injected into the atmosphere after treatment by dust catcher.