Specifications

-Pre-scoring wheel
-Bi-plate trimming knives
-Motorized digital control
-Touch screen
-Planetary gear structure

1. The Line Creasing Device

(1). The material of the line creasing wheel roller is seamless steel tube.

(2). The surface of the creasing wheel roller is grinded, polished and hard chromium plated.

(3). The distance between the upper and lower line creasing wheel roller is adjusted by hands while the dial show the adjustment date and the adjustment scope is 2-12mm.

(4). The upper and lower line creasing wheel roller adopts the crosshead connecting with the drive gears. when adjust the distance between the two rollers, the distance between the two driver gears of the two rollers will not changed, ensure the high precision for the carton printing, and low noise of the machine, and long life of the gears.

 

2.The Slotting Knife Plate Moving Device

(1). The slotting knife plate roller is grinded twice and is polished and hard chromium plated after balance correction. 

(2). The width of the slot is 7mm.

(3). The slotting knife is sawtooth, adopting alloy steel material. After heat treatment and grinded, more hardwearing and sharp-edged.

(4). The cardboard cutting knife adopts alloy material after heat treatment and grinded, more hardwearing, sharp-edged and high precise.

(5). The slotting knife plate and line creasing wheel synchronously move left and right, which is adjusted by manually.

(6). The four slotting knives are synchronously moving for adjusting the high of the carton box, adjusted manually.

(7). The distance between the upper and lower slotting knife plate roller is adjusted by hands, while the dial show the adjustment date and the adjustment scope is 2-12mm.

(8). The upper and lower slotting knife plate roller adopt the crosshead connecting with the drive gears. When adjusting the distance between the two rollers, the distance between the two drive gears of the two rollers will not changed. That ensures the high precision for the carton, and low noise of the machine, and long life of the gears.

 

3. The Clockwise and Anticlockwise Phase Adjustment of the Slotting Unit

(1). Adopting satellite gear structure for adjusting the clockwise and the anticlockwise phase of the slotting knife plate.

(2). The clockwise and the anticlockwise phase of the slotting knife plate is adjusted 360° by electricity, and the number could be adjusted by inputting while the machine running or stopping.

 

4. Handle and Hole Equipment (This is not included in the machine, if need, pay for it additionally)

(1). The width of the upper and lower die wheel is 100mm and the lower die wheel is covered with die-cutting rubber cushion.

(2). The size of the handle and hole can be chosen by the customer.