Specifications

Plastic Drainage Sheet building material HDPE drainage sheet are designed for use in both vertical and horizontal drainage

Plastic Drainage Sheet building material HDPE drainage sheet

1.Sheet Drains for single side drainage applications are prefabricated products that consist of a solid, formed, three dimensional core covered with a geotextile filter fabric bonded to the dimple side of the core. The filter fabric is securely bonded to prevent soil intrusion into the core flow channel while allowing water to freely enter the drainage core.

2.Sheet drains solid cores allow water entry from one side and are typically used to collect and re-direct water from a structure or site.

3.Sheet drains are designed for use in both vertical and horizontal drainage applications. Designed to provide full drainage for large surface areas, sheet drains are constructed to various strength, flow and soil filtration requirements for a wide range of construction applications.

4.Sheet drains collect and transport significantly more water than aggregate systems and are constructed using recycled materials providing a sustainable, cost effective drainage alternative.

5.Sheet drains are available in 2.4m) wide sheets in rolls 10-20m long. The core height is 10-30mm thick.

 

Technical Information Table

 

Model Standard	HW-PED8	HW-PED10	HW-PED12	HW-PED15	HW-PED20	HW-PED25	HW-PED30
Material	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE	HDPE
Dimple height mm≥	8	10	12	15	20	25	30
Elongation percentage(%)≥	25	25	25	25	25	25	25
Tensile strength(N/5cm)	350	350	350	350	350	350	350
Compressive strength(kPa)≥	200	200	200	150	150	150	150