Product Details

ceramic brake booster Wholesale and retail

Specifications:

high and steady coefficient of fricition with the change of temperature
Proper hardness auto brake shoe
brake smoothly
Excellent friction property, lower wear rate and high rotary burst strength in high temperature with good durability.
Less dust car brake shoe
don’t scratch mating plate or opposing material
Long service life
Noiseless

OEM Service

Material	Aluminum A380, Aluminum A383,ductile iron, low carbon steel, stainless steel 304,316,316L,grey iron
Process	Aluminum die casting, sand casting, lost wax casting, cast iron casting,stamping, machining
characteristics	Highest operating temperatures Outstanding corrosion resistance Light-weight Very good strength and hardness Good stiffness and strength-to-weight ratio Excellent EMI & RFI shielding properties Excellent thermal conductivity High electrical conductivity Good finishing characteristics Full recyclability
Industry Standards Met	ISO 9001:2008 Certified
Tooling material	Urethane Aluminum Steel Iron
Casting mold type	Automatic Molding ,Cope and Drag

Brake Pads Feature:

Stopping Performance
Low Brake Noise Performance
Durability

Consistent Pedal Feel
Good Brake Fade Recovery
Friction Formulation: Federal-Mogul quality materials
Great value for money!

Brake Shoes Feature:

top 3 Reasons to buy Brake Shoes:

1. The best warranty in the industry —shoes are warranted against de-bond failure for the usable life of the friction material
2. An exclusive no-hassle shoe core program on all Meritor / CG Meritor fabricated shoes. No core charge!
3. All cast shoes have a guaranteed core credit upon receipt of the shoes

Advantages, Riveted& Bolted Shoes:

Eliminates accidental block cracking during bolt torquing
Reduces personnel exposure to potentially hazardous brake dust
Reduces labor hours required for relines, and significantly reduces brake maintenance costs

In addition shoes also feature:

Up to 40% greater mileage between relines
Reduced brake noise — no hardware to loosen and chatter
Eliminates bolts that can score brake drums
40 to 50% increased resistance to shear compared to bolted and riveted brake linings
Eliminates bolt holes in block that can collect drum damaging debris
Eliminates shoe-weakening table rust that can form under bolted block

Brake shoe linings are made from different heat resistant materials mixed with compounds such as brass, ceramic, and graphite. This lining can be riveted or glued to the shoe. These materials have replaced the asbestos linings manufactured in the past. Please note that asbestos is a hazardous material. NEVER breath brake dust. Assume that every brake system you are working with is hazardous (It is!) and dis pose of any brake dust properly.

When the brakes are applied the primary shoe is forced into contact with the brake drum by the piston of the wheel cylinder. The rotating brake drum then drags the primary brake shoe along with it in its forward rotation. This forward motion wedges the shoe into the drum and transfers to the secondary shoe, which is also forced into the drum with help from the wheel cylinder's piston. Brake shoe anchors are attached to the backing plate and allow for the brake shoes to come into full contact with the drum, providing an anchor for the momentum.

It's the lining of the primary and secondary shoes coming into contact with the rotating drum that causes the friction necessary to bring the vehicle to a stop. This friction is transformed energy and produces great heat. In fact a brake shoe can easily reach 450° F from a 55 MPH stop. As brake shoe temperatures increase, the overall performance and effectiveness of the shoes will suffer. They will also wear faster.

Product pictures

ceramic brake booster Wholesale and retail

Our Services

1. 100% test before shipment.

2. Adequate supply capacity and delivery timely.

3. Reasonable price for you.

4. We report our production schedule to customers everydays by email or photos,it's just like the production is happend under your nose.

5. Both in -house QC and lab test provided.

FAQ

What is the warranty?

30000kms and 50000kms .

Brake pads include shims or not?

According to customer's

Delivery time?

15 days after order confirmed

What is “Positive Molding Technology” and why is it better?

Positive Molding Technology is an important factor in production of Top products.Positive molding results in a more uniform density in the production of the brake pad. It also allows using less resin content in formulation of the brake pad which can lead to improvement in the fading characteristic of the brake pad. The brake pads produced by positive molding process is proven to have much better stopping performance.

How Can I Replace My Own Brakes

1.Get the correct brake pads.

2.Make sure the vehicle is cooled down.

3.Loosen the lug nuts.

4.Carefully jack the car up until it can be removed comfortably.

5.Remove the wheels.

6.Tighten the lug nuts.

7.Start the vehicle.

8.Test your new brake pads.

The Motor Works is equipped to handle all modern braking systems including anti-lock braking systems and electronic brake controls. We re-set the brake pad warning lights after servicing your brakes and offer very competitive pricing on all brake repairs.

ceramic brake booster Wholesale and retail