Specifications

1) 100% polyacrylonitrile
2) Crack resistance PAN fiber
3) Engineeing fiber for concrete

Product Name:  Anti-Crack PAN Engineering Fiber for Concrete  

 

PAN Engineering Fiber is a new kind of synthetic reinforcement fiber for concrete. It is made of polyarylonitrile resins by special technique. It can improve the reinforcement of concrete and

prevent crack. 

 

 

 Specifications:

 

Raw material	Polyacrylonitrile
Type	Bunchy monoflament
Identical Diameter	13-25um
Length	6, 8, 12, 16mm
Crack Elongation	10-20%
Density	1.18g/cm³
Tensile Strength	≥970MPa
Elastic Modulas	≥17000MPa
Resistance to Acid	Better
Color	Light yellow

 

Function of PAN Engineering Fiber:

 

 For cement concrete:

 

1. Increase the crack resistance of concrete;

2. Increase the frost resistance and seepage resistance of concrete;

3. Decrease the fragility of high strength concrete;

4. Increase the wear resistance, tensile strength and toughness of concrete;

5. Increase the impact resistance of concrete;

6. Increase the durability resistance of cncrete;

 

For bitulith:

 

1. Increase the dispersion ability of asphalt concrete;

2. reinforcement of  asphalt concrete;

3. Increase the stability of asphalt concrete;

4. Improve the toughness and frost resistance of bitulith;

5. Inprove the anti-skidding and wear-resisting ability.

 

Use instruction of  PAN Engineering Fiber:

 

1. Mixing amount: 0.9kg/m³ polyacrylonitrile fiber for cement concrete. 1.5-1.8kg/m³ polyacrylonitrile fiber for bridge floor with high requirement of anti-impact.

2. Stirring requirement: It is no need to change the proportion of cement, sand and aggregate.

For cement concrete: crushed stones, fibers, cement and sand are put into the blender and stir for 30 seconds, then put water and stir for 1 minute.

For  asphalt concrete: Put crushed stones, sand and fibers into the blender and stir for 20 seconds. Then put the asphalt and stir up. The total time of stirring is not less than 60 seconds.

 

Application Field of PAN Engineering Fiber :

 

1. The road, surface of road, bridge floor, runway and floor of the factory.

2. Port, deepwater wharf, project in the severe cold area.

3. Anti-collision wall of highway, anti-impact board;

4. Reservoir, swimming pool;

5. Side wall and roof of the basement

 

Other types of engineering fiber:

 

 

 

Our advantage:

 

One type of Chongqing Joywell's main products is construction and engineering fiber. We can not only provide our customers with best products but also best service. Integrity first and Customer first have been our value from our company established in 1999 and there will be forever.

 

 Package:

 

1kg/pe bag, 25kg/plastic woven bag,1x20GP can load 10000kgs