soft pvc waterproof glue

soft pvc waterproof glue

USD $0.85 - $4.3 /Meter

Min.Order:500 Meters

Supply Ability:
20000 Meter / Meters per Month
Port:
Shanghai nanjing
Payment Terms:
T/T Credit Card PayPal

Quick Details View All >

Place of Origin:
Anhui, China
Brand Name:
Kangjia
Model Number:
pvc pipe glue
Material:
Other, ppr
Specification:
16-32mm
Length:
customized

Anhui Kangjia Plastic Building Materials Co., Ltd.

Business Type: Manufacturer,Trading Company
Hefei Anhui China
Main Products: PVC Foam Board ,Plastic Pipe For Water Supply ,Plastic Draniage Pipe ,Electronic Conduit ,Power Cable

Product Details

 

Specifications

 

HOPSON PVC Solvent Cement is mono-component solvent glue with vinyl polymer as main material and for bonding hard PVC.
For use with PVC plastic pipe&fitting through 12'' diameter.

 

s


DIRECTIONS FOR USE

p fa

Store and use at temperatures between 40°F and 100°F. Stir or shake before using; If jelly-like, dont use.

 

  1. Square pipe ends and remove all burrs and dirt.
  2. Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way in. If pipe bottoms, it should be snug.
  3. Clean pipe and fitting with Purple Primer or an IAPMO listed primer.
  4. When solvent welding at temperatures below 40°For above 85°F, consult data sheet.
  5. When solvent welding pipe over 3”, recommended applicator is a natural bristle brush one-half the pipe diameter, i.e., 3”brush for a 6”pipe.
  6. Apply thin coat of cement to fitting; avoid pudding inside. Make certain the entire socket surface is convered. Be especially careful not to overcoat thin wall or bell end pipe.
  7. Apply liberal coat of cement to pipe to the depth of the socket; leave no void.
  8. Assembe parts QUICKLY! CEMENT MUST BE FLUID. If not fluid, recoat both parts.
  9. Push pipe FULLY into fitting using a 1/4 turning motion until pipe bottoms.
  10. Hold pipe and fitting together for 30 seconds. Wipe off excess with cloth. Completed joints should not be disturbed until they have cured sufficiently to withstand handling.
  11. Keep container closed when not in use.
  12. Do not pressure test until cement is fully cured

e

isoft pvc waterproof glue


 

soft pvc waterproof glue

 

 

soft pvc waterproof glue

 

 

soft pvc waterproof glue

1 .We are one of the three largest manufacturers in China.

2. We have skilled engineers and excellent after-sale service network .

3. Fast deliveryof ppr 45 degree Elbow . 

4 .IS09001: 2000, IS014001: 2004,OHSMS 28001: 2001 certificates available .

5. We will do our best to help our customers,and will accept any suggestion 

of our products.

2 Factory direct  pvc glue msds e

soft pvc waterproof glue

Anhui Kangjia Plastic Building Materials Co., Ltd.
Add: Industrial Zone, Gangji, Changfeng, Hefei, China.
Post Code: 231137
Tel: +86-551-62720156 Fax: +86-551-66773883
Skype: lancelot0204_1

Website:  Http://

 

more products,pls click there:   http://ahkangjia.en.china.cn/

F high pressure pvc glue w

Contact Supplier

Mr. luo chengcheng overseas sales manag Chat Now
Telephone
0086-0551-62720156
Mobile
15215510300
Fax
0086-0551-66773883
Address
Industrial Zone, Gangji, Changfeng, Hefei, China Hefei,Anhui

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Rubber & Plastics > Plastic Products > Plastic Tubes
Categories
Hi~