1. Compact podium: Everything fits or slides into the box that is completely lockable with electromagnetic locks and accessible by IC security card.

2. When closed it can serve as an audio and notebook only supported system, there is access to laptop hook-up, the microphone and a pre-cut area that can hold an AMX or Creston control panel or Exton.

3. Main display is on a lift and lifts from the system and tilts the display tray to the desired angle, there is no display included, and customer may install any display on its Seamount.

4. Top level: Slides out flat to hold a notebook with flip-top connection panel. The top has 2 XLR3 sockets for microphones (one can be exchanged with an XLR5 socket for a switchable pre-AMP microphone) and an XLR4 socket for a reading light. 5. Second level: Slides out in opposite direction, includes a 12" touch panel with VGA connector, this is connected to a controller system for device and room control. This display can rotate and tilt in many directions. It includes 4 USB slots on its front edge.

6. Third level: Display tray with VESA mounts accommodates various display types (fits e. G. 17", 19", 22" WACOM; 17", 22" SMART Symposium; 22" ELO touchpad touch. ).

7. Fourth level down: Keyboard and touch pad tray, this includes the new Bamboo pen & touch high resolution drawing pad that will now include finger touch and Multi touch.

 8. Fifth level: Large pull-out tray to hold a document camera, other laptop or otherwise serves as a table (front folds out) for seated persons to present from this level using the 12" monitor and gooseneck microphone tilted towards this direction, this makes the system ADA compliant.

 9. Sixth level down 19" rack area behind lockable doors with 12U rack space offers the space for any of the customer's 19" rack and PC equipment.

10. Ahandle on top and rollers on the bottom allow for movement of the entire system.