Dual sensors automatic light wall installation switch sensor
USD $5 - $15 /Piece
Min.Order:100 Pieces
Ningbo Sharkward Electronics Co., Ltd.
SK901 Dual sensors automatic light wall installation switch sensor
The wall switch occupancy sensor,is designed to replace the normal ON/OFF wall switch.It will detect motion from any heat-emitting source(such as a person) within its field-of-view(the area of surveillance).After the primary detector(PIR) senses presence and engages then microphonics(the sound detection system) comes into operation to keep the status of the detector as "Occupied" even though there is no detected motion but if any sound.The controlled lights will remain ON until no motion/sound is detected and the pre-set time-delay has expired.
ELECTRICAL | |
Line Voltage | 120/277VAC, 220~240V/AC |
Operational Frequenciea | 50/60Hz |
Wire Designation | Line-Black, Load-Blue Ground-Green,Neutral-White |
Load Rating | Fluorescent:1200VA-10A/120V 2700VA-10a/277v Incandescent:800W-6.67A/120V Inductive Load:1/4hp(185W)-5.8A/120V |
Minimum Load | 10mA |
ENVIRONMENTAL | |
Operating Temperature Rang | 0°C to 50°C |
Storage Temperature Range | -10°C to 85°C |
Relative Humidity | 20% to 90% non-condensing |
Agency Approval | ETL/UL Listed/CSA Certified Complies with California Title 24 Energy Code Complies with FCC Regulations |
ORDERING INFORMATION | |
SK901IE | PIR sensor+microphonics Earth required |
SK901IN | PIR sensor+microphonics, Neutral required |
SK901UN | Ultr sonics+microphonics, Neutral required |