Product Details

Gold shaker table price

Product Description

1.Shaking Table Application

Concentrating table is applicable to fine minerals, like tungsten, tin, tantalum, niobium, other rare metals and precious metals. It is also able to process ferro-manganese and mica and reclaim iron from tailings.

2.Product Advantage:

Shaking Table — Product advantages

1.High rich ore rate

2.less number of times of beneficiation

3.It is convenient to observe and adjust machine
4.It consumes no reagent and little electricity

3.Product Feature:

1 The rich ore ratio (the ratio between concentrate and raw ore) is far higher than other ordinary beneficiation methods

2 Eligible concentrates and ineligible tailings can be provided at one time.

3 Minerals are in the shape of sector, which makes it easy for observation and adjustment.

4 The partition plate can separate minerals with different properties, so different kinds of minerals can be provided.

5 It consumes no reagent and little electricity.

Product principle

Shaking Table — Product principle

The working principle of this machine is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.

This machine is composed of three parts, i.e. head of shaking table, surface of shaking table, as well as bearing and adjusting gradient.

1. Head of shaking table: This is eccentric connecting-rod type mechanism. The motor drives the eccentric shafts to rotate and the connecting rod to move up and down. When the connecting rod pushes down the toggle plate compression spring, the pull rod drives the table surface to move in the direction of table head. When the connecting rod pushes it upward, through the spring tension, drives the table surface to move in the opposite direction. When they are linked, the rotating motion of eccentric shaft is changed into horizontal alternating differential motion of table surface.

2. Shaker table for gold Table surface: It is mainly composed of vibrating roof, steel skeleton, glass fiber reinforced plastics and wear-proof surface, feed water tank, feed chute, and draw bar. The table surface adopts steel skeleton FRP composite structure. That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glass fiber reinforced plastic surface. Its above uses abrasion-proof materials to make surface and riffle (notch groove).

3. Bearing and Adjusting Gradient Mechanism

Shaker table for gold The bearing and adjusting gradient mechanism is mainly composed of shaking support plate, adjusting seat board, saddle seat, and adjusting screw rod. The shaking support plate enables the table surface to make arc forward and backward alternating movement on vertical plane. The shaking support plate and shaking box are fixed on the adjusting seat board with gripping channel steel. When hand wheel regulating screw rod is used to get the adjusting seat board to rotate on the saddle seat, the Transverse gradient of table surface can be adjusted.

Technical Parameter

model		6-S	Ion wave	2100×1050
Stroke(mm)		10-34	8-22	12-28
Frequency of stroke(T/min)		240-380	240-360	250-450
Feed granularity(mm)		0.02-2	0.019-2	0-4
Capacity (t/day)		15-108	5-35	0-4
motor	model	Y90S-4	Y100L-6	Y90L-6
	Power(kw)	1.1	1.5	1.1
Overall dimension: length×width×height(mm)		5600×1825×1560	5454×1825×1242	3045×1050×1020
Feed thickness		Coarse sand:20-30%, fine sand:18-25%, slurry:15-20%
Water consumption(t/h)		Ore sand:0.7-1.0; Fine sand:0.4-0.7
productivity(t/h)		Coarse sand:1.0-1.8, fine sand:0.5-1.0, slurry:0.3-0.5