5 line wifi ip phone 

CONFIGURATION

1.1 Web-based Configuration

This section will show you how to configure your IP622 using the web-based configuration interface. The default network settings are the

following:

Default Internet Connection Type: DHCP

Default PC Port Connection Type: NAT

Default user name and password of admin mode:

admin, admin

Default user name and password of user mode:

user,user

Web Idle Timeout: 5 min

1.2 Login

To access the webpage through a web browser, please following the below steps:

Step 1.Setup IP652 correctly

Step 2.Lookup the Internet IP Address in the left side of LCD

Step 3.Enter “http://Internet IP Address” in the address field of the browser.

Step 4.Type “admin” or “user” for the User Name, click on the Login button to access the configuration page

There are two levels of web configuration: one “user” ID level that can view just some portion in the web, and the other “admin” ID level that

can view and configure all settings in the web-based configuration interface. To use “admin” ID for login, please contact your administrator,

Page 39 of 82

supplier or service provider.

1.3 Webpage

No. Name Description

1

main

information

Display the firmware version, DSP version,

Current Time, and administration mode.

Press Logout button to logout.

2 navigation bar

Click navigation bar, many sub-navigation bar

will appear in the place 4.

3 Help

Display the main information for configuration;

user can get help from it directly.

4

sub-navigation

bar

Click sub-navigation bar to enter to

configuration webpage

5

configuration

title

The configuration title

6

configuration

bars

The configuration bars

 Every time making some changes, user

should press the button to confirm and save the

changes.

 After pressing the button, the red

will appear to notice

Page 40 of 82

user to reboot.

To cancel the changes.

Press it to reboot IP652

Page 41 of 82

1.4 Status

1.4.1Basic

This webpage displays the basic status

of your IP652, including the information

about product information, SIP account

status, network status, VPN status, PC

port status and system status.

Click Refresh button to refresh the status.

Page 42 of 82

1.4.2Syslog

This page displays the log of system.

User can press Clear button to clear all

information.

Click Refresh button to refresh syslog.

Click Save to save the system log to your local

PC.

Page 43 of 82

1.5 SIP Account

1.5.1SIP Settings

1.5.1.1 SIP Parameters

1.5.1.2 NAT Traversal

Webpage Field Name Description

NAT Traversal

If or not enable NAT.

IP652 supports STUN traversal, choose “STUN”

in the “NAT Traversal Mode” if you want traverse

NAT/Firewall.

STUN Server

Address

STUN server IP address.

NAT Refresh

Interval (sec)

The interval to refresh

Port STUN port

1.5.2Line 1

In this webpage, users can configure the information about SIP account1, including the following 4 parts: Basic, Audio Configuration,

Page 44 of 82

Supplementary Service Subscription and Advanced.

Following is the description about that.

1.5.2.1 Basic

Set the basic information provided by your VOIP Service Provider, such as Phone Number, Account, password, SIP Proxy and so on.

Webpage Field Name Description

Line Enable If or not enable Line1

Peer to Peer

If or not enable PEER to PEER

 If enable, Line1 will not send register request

to SIP server;

 In System Status, SIP-1 Status is Registered;

SIP-1 can make call out, but others can not call

SIP-1.

Proxy Server The domain or IP address of SIP Server

Proxy Port

The port which SIP Server supports for VOIP

service, default is 5060

Outbound server Outbound server IP or domain name

Outbound Port Outbound server’s Service port

Backup

Outbound

Server

Backup Outbound server IP or domain name.

Display Name The number will display in callee

Phone Number Number of telephone provided by SIP server

Account SIP account provided by SIP server

Password SIP password provided by SIP server

1.5.2.2 Audio Configuration

Select the audio Codec you want to use.

Webpage Field Name Description

Audio Codec Choose the audio codec type from G.711U,

Page 45 of 82

Type1 G.711A, G.722, G.729, G.723

Audio Codec

Type2

Choose the audio codec type from G.711U,

G.711A, G.722, G.729, G.723

Audio Codec

Type3

Choose the audio codec type from G.711U,

G.711A, G.722, G.729, G.723

Audio Codec

Type4

Choose the audio codec type from G.711U,

G.711A, G.722, G.729, G.723

Audio Codec

Type5

Choose the audio codec type from G.711U,

G.711A, G.722, G.729, G.723

G.723 Coding

Speed

Choose the speed of G.723 from 5.3kbps and

6.3kbps

Packet Cycle The RTP packet cycle time

Silence Supp

Enable

If or not enable silence

Echo Cancel If or not enable echo cancel,default is enable.

1.5.2.3 Supplementary Service Subscription

Webpage Field Name Description

Call Waiting If or not enable Call waiting.

Hot Line

Fill in the hot line number.

Pickup handset or press speaker/headset button, IP622

will dial out the hot line number automatically.

MWI Enable If or not enable MWI (message waiting indicate).

Voice Mailbox

Numbers

Fill in the voice mailbox phone number

1.5.2.4 Advanced

Webpage Field Name Description

Domain name

Type

If or not use domain name in the SIP URI

Carry Port If or not carry Port information in the SIP URI.

Page 46 of 82

Information

Signal Port The local port of SIP protocol, default is 5060

DTMF Type

Choose the DTMF type from IN_band, RFC2833 and SIP

INFO.

RFC2833

Payload (>=96)

User can use the default setting

Register Refresh

Interval

The interval between two normal Register messages. You

can use the default setting.

RTP Port

Set the port to send RTP.

IP Phone will select one idle port for RTP if you set “0”,

otherwise use the value user set.

Cancel Message

Enable

When you set enable, an unregistered message will be sent

before registration, while you set disable, unregistered

message will not be sent before registration. You should

set the option for different Proxy.

Prack Enable If or not enable prack.

SIP OPTIONS

Enable

If this option enable, IP Phone will send SIP-PING to

Server periodically instead of sending hello packet. The

send interval is Keep-alive interval.

Keep-alive

interval (10-60s)

The interval that IP Phone will send an empty packet to

Proxy.

Anonymous Call If or not enable anonymous call.

Anonymous Call

Block

If or not enable anonymous call block.

Proxy DNS

Type

Set the proxy DNS type.

Use OB Proxy

In Dialog

If or not enable OB Proxy in dialog.

VPN If or not enable VPN.

Dial Prefix The prefix added before the number user dials.

User Type Select the user type, options are IP and Phone.

Only Recv

Request From

Server

If or not enable only receive request from SIP server.

Server Address

Enter the address of the server which the phone receives

the request.

SIP Received If or not enable sip received detection.

Page 47 of 82

Detection

1.5.3Line 2/3/4/5

The parameters of Line2/3/4/5 are same as Line1 except the value of Line Enable.

1.5.4VoIP Qos

Webpage Field Name Description

SIP/RTP/Data

Qos

Default is 0, user can set from 0~63.

5 line wifi IP phone