Congratulations you are about to purchase the H2 Hydroponics "pH & Ec controller". With this driver you do not have worry about filling your water tank, adjust the values of Ec and Ph, and perform irrigation tasks; the H2 hydroponics "pH &Ec controller"system will do it for you.

This driver is able to set the values of Ec and pH optimum in the water and automatically activate the pump irrigation once these values are established and fill the water tank.

The "pH& Ec controller"has two pumps that inject fertilizers and a pump that regulates the Ph. Also it has incorporated an irrigation controller to automatically activate thepump irrigation in two different ways, continuously or by schedule (up to four times a day).

If we acquired the "optional" elements (max-min probes and alarm, solenoid valve and flow sensor), we have the option to control:

–            The filling of water in the tank through the upper and lower sensors, in addition to an alarm probe that disables the system in case of emptying the tank.

–            Enable the fill solenoid valve or reverse osmosis system.

The flow sensor will activate the driver if there is movement of water through the collector and it will disable the system if it detects lack of water in the system.