Product Details

SMB IP-PBX & Router asterisk ip pbx skype gateway

high-integrated IP-PBX

SK5008, based on Asterisk and Open WRT, which make focus on the needs of small and medium-sized domestic enterprises. It is an embedded IP telephone system, support network control and management in one device. What is more, it provides a business IP phone system thatis adapted to the using of about 100 people.

Feature

SK5008 is a silver alloy device, user can see different ports on the panel of SK5008 , you can
see 1 reset console, 1 serial console, 4 LAN ports, 1 USB port, 1 SD card slot and 8 FXO ports on
the front panel of SK5008 . The following picture shows the ports and the table shows the
functions of different ports:
Port Description
Reset Press reset button 5s to make SK5008 factory default.
Serial Console Connect it to the com port of PC to enter SK5008 ’s Linux interface.
Internet Connect to Internet or router.
LAN Connect to PC or build small LAN network.
USB Access for USB storage device.
SD Used to insert the SD memory card.
FXO Used to connect to the analog line.
There is a power port and a power button on the back panel of SK5008 .

FLASH	8M bytes Flash for BIOS, SD memory card for Asterisk
Power supply		AC input: 100-240V, 56-60Hz
LED indicators		1 Internet led for indicating Internet connecting; 4 Ethernet led for indicting Ethernet connecting; I Serial Console for indicating Serial Console connecting.
Environmental		Operation Temperature: 0-45 degree C Storge Temperature: -25-85 degree C Relative Humidity: 10%-90% No Condensing Shock: Up to 75cm(30 inches)
I/O Interfaces		1 RJ45 for WAN port(10/100/1000M) 4 RJ45 for LAN ports(10/100/1000M) 1 SD Slot for Flash for Flash Memory Card 1 USB port for 3G card and printer 8 RJ11 ports for FXO 1 button for rebooting and resetting default
Dimension		19 inches U

How to use it :

As a gateway, you can insert one end of the Ethernet cable into
SK5008 ’s Internet port and insert the other end of the Ethernet cable to your existing broadband
connection port. And then log in SK5008 ’s webpage to configure its Internet access ways, such
as Static IP, DHCP or PPPoE;

As bypass access, you don’t need to connect to the Internet port;
Insert one end of Ethernet cable into one of the LAN ports, and insert the other end of the Ethernet
cable to your local network. Then connect the power adapter to the power port on the back panel
of SK5008 , and plug another end of power port into a wall outlet or power strip. And then please
turn on SK5008 .

If you can’t access SK5008 , please check if you have connected the RJ-45 cable to the LAN
port and if your computer is in the same network 192.168.0.xxx as SK5008 .
Notice: the recommended web browser for logging in SK5008 is Firefox.

Package Contents
♦ One SK5008
♦ Two L-shape brackets and some screws
♦ One serial console line
♦ One 4G SD card
♦ One power line

Service and guarantee

All products have been tested and checked carefully before the package;
All of our products will share for free tech support forever to guarantee your business run smoothly;
We have professional tech team and can support remote tech support over team viewer to help you to make the config or teach you how to make the config , and any problem or question , we can arrange the on-line tech support in time .
All the device of our side we will guarantee the quality and best price , tech support and quick shipment;

The two PBX links each other via SIP trunk.
Step 1: Set up a extension 6005 in PBX A
Extension: 6005; phone number of this extension
Name: User_PBXB
Password: 6005; SIP log on password
Caller ID: 6005; Caller ID
Step 2: Set up an SIP trunk in PBX B to link PBX A via this User_PBXB extension. In the page
Trunks-->Add Voip Trunk

Step 3: Set Calling Rule in PBX B, all calls start with 6 will be sent to PBX A. In the page:
Outgoing Calling Rules-->Add New Calling Rule
Step 4: Add this new calling rule “To_PBXA” to the exist dial plan. In the page: DialPlan-->Edit
DialPlan1

Any further details , pls click here: