Rotary Pulley drive Vacuum Filter, belt vacuum filter, automatic vacuum filter
USD $10,000 - $600,000 /Set
Min.Order:1 Set
Nuclear Industry Yantai Tongxing Industrial Co., Ltd.
Company Brief Introduction
There are more than 100 technicians in our technical center and more than 90% are undergraduates, among them 10 are senior experts, 2 experts are national level technician, 5 outstanding younger of Shandong province. Our company owns more than 30 patents, including 10 invention patents. We have created five standards for filter equipment. We covering 70% market share in domestic, and exported to more than twenty countries.
widely applied in military, chemistry, metallurgy, mine, coal power plant, food, pharmacy, coal washing, environment protection and other fields, The management ideas of our company are unity, honesty, diligence and innovation.
Rubber belt filter Introduction:
DU series level rubber belt vacuum filter is equipment using vacuum negative pressure as impetus to separate the solid and liquid. The filter district is arranged levelly to sequentially finish the procedure of filter, rinse, dry and regeneration of the filter cloth with high efficiency, high output, good rinsing effect, low moisture, agile operation and low repair cost. It can be used to separate solid and liquid in the fields of metallurgy, mine, chemical industry, papermaking, food, pharmacy and environmental protection, especially for dehydration of gypsum in the process of smoke desulfurization.
Characteristics
1.Ring type rubber discharging belt is used with high tensile strength and long service life
2.Ring type abrasive belt is set between vacuum container and the rubber belt, water is used to airproof and lubricate which can keep stable and higher vacuum degree, good for stable operation state.
3.Rubber belt is supported by air cushion or water to reduce the resistance and is good to prolong service life of the rubber belt.
4.The whole structure adopts module design which can be consolidated freely, convenient for transportation and installation.
5.Vacuum balance automatic discharging tank or steam-liquid separator is set to carry out zero potential difference automatic discharging or high potential difference discharging to satisfy requirements from different working states.
6.Air chamber type automatic deviation correction device is set to assure stable running of the filter cloth.
7.The control system uses PLC technology to carry out PID regulation, provide safety guarantee of running and supervision of the procedure.
Working Principle
Specification
Horizontal belt vacuum filter parts introduction
Application site
The largest Belt vacuum filter application use site of the world,57 sets our equipment are using for this only 1 project.
Frequently Asked Questions:
1.Q:Are you a manufacturer or trading company
A: We are a manufacturer, we have rich experience in solid liquid industry for more than 20 years.We are the Horizontal belt vacuum filter and TC ceramic disc vacuum filter,HVPF tower press filter leader of China.We are the solid liquid separation equipment standard drafter of China.There are more than 10000 sets our equipment are running all of the world.
2.Q:Where is your factory located? How to get there?
A: Our factory is located in C distict of Qixia Songshan development zone Yantai City of Shandong Province,China. It is just half an hour from Yantai airport. We can pick you up at any time at there, we warm welcome you come to visit our factory at any time.
3.Q: Do you have minimum order quantity request?
A: for spare parts we have no MOQ,but for whole set equipment of course 1 set is the minimum.
4.Q: Do you have certificates?
A: Yes, we have CE, ISO,SGS.etc. certificates.
5.Q: Can you meet my special requirements for my products?
A: Yes, we have rich expeirence and we have a professional design team. We can provide differents drawings according to your requirements.
6. Q:How to buy your idea products?
A:You just need provide us your slurry informations ,water sources, ground area (connect us for more details).Then will give a satisfy solution.
7. Q:How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 50% deposit before producing, 50% balance before loading by TT.
8. Q:What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
9. Q: How to pack the products?
A: We use stuitable package for ocean shipment according to our experience. If you have special package requirements, we will pack as required.
10. Q: How to keep your equipments from corrosion?
A: We use differents consturction material for your differents material slurry,according to your slurry PH value.Normally,for painting we use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you produce your equipment ?
A:We use high automatic machining technology includes laser/plasma cutting, automatic welding,CNC cutting and bending machine,you can see the high-tech machinces in our company workshop everywhere.
12. Q:How to install after the equipments arriving destination?
A: We will arrange our engineers for you to guide installation and commissionning jobs.Meanwhile,we provide detailed illustrations to you.
13.Q:How to select the correct equipment size ?
A:We will send you a questionnaire about your material slurry,you just try to fill out it,then we will try to give you a suitable solution for you according to our experience,or you can send us some sample to do the tests.We can do the tests for free for you,we own a high-tech tests room in our plant.
Military quality,fist-class service,worth to trust!