Specifications

Suction line accumulator:
1.Rational design : "U" tube
2.Anticorrosive powder painting
3.Max. working pressure: 3.0 Mpa

Product introduction:

SR Suction Line accumulator is designed with bend pipe inside  to prevent internal splashing and aid in the collection of oil, and the ben pipe should  be installed near the compressor as possible.

 

Features:

1." U" shape pipe designed keeps max refrigerant flow capacity and the least oil blocking.

2. Entrance of type " U" shape pipe is in the back of inlet oriented pipe preventing liquid entering into compressor and destroying it.

3. Throttle hole is matching well with system capability to ensure the best about the liquid refrigerant and oil capacity  that flow into compressor

4.Surface corrosion resistant static electrical painting procedure protecting the shell from the rust

 

Dimension

TYPE	ODF Connection		A(in)	B(in)	C(in)
	in	mm
SR-204	1/2	12.8	4.0	8.38	2.00
SR-205	5/8	16.0	4.0	10.63	2.00
SR-206	3/4	19.2	5.5	10.25	2.75
SR-207	7/8	22.4	5.5	12.50	2.75
SR-208	1-1/8	28.8	6.5	15.63	3.15
SR-209	1-3/8	35.0	6.5	20.63	3.15
SR-210	1-5/8	42.0	6.5	22.63	3.15
SR-596	3/4	19.2	5.0	8.50	2.75
SR-597	7/8	22.4	5.0	8.50	2.75
SR-5126	3/4	19.2	5.0	11.61	2.75
SR-5127	7/8	22.4	5.0	11.77	2.75
SR-5137	7/8	22.4	5.0	13.39	2.75
SR-5139	1-1/8	28.8	5.0	13.39	2.75
SR-5179	1-1/8	28.8	5.0	16.93	2.75
SR-51711	1-3/8	35.0	5.0	16.93	2.75
SR-61411	1-3/8	35.0	6.0	13.74	2.94
SR-2013	1-5/8	42.0	6.0	20.28	2.94