Product Details

Specifications

1. Material: Galvanized Steel, Galvalume Steel
2. Total Thickness:0.7mm-2mm
3. Length:Accord to your request

Product

Name: Metal Floor Decking

1. Raw Material: SGCC;

2. Galvanized Zinc Sheet : Optional from 60 g/m2---450 g/m2;

3. Total Thickness: optional from 0.7-2mm;

4. Assemble: More convenient than traditional support mound;

5. No need to verify distance between purlins;

6. Hot Dipped Galvanized, easy to maintain;

7. Installation: Put the sheet above the welded wire net,fill cement between them:

8. Super Anti-earthquake Quality: light but high intensity, huge loading capacity;

9. Low Cost: Use less steel mounds in the same loading capacity;

10. Applicate for: factory, building, warehouse, garage, exhibition center and cinema,etc.

11. Recyclable, can be disassembled and installed again;

12. Safe, earthquake resistant;

13. Can be painted according to your request.

Specification

No.	Model	Wave Height(mm)	Wave Distance(mm)	Effective Width(mm)	Expanded Width(mm)
1	HG-1025	51	342	1025	1250
2	HG-914A	51	304.5	914	1170
3	HG-600A	75	200	600	1000
4	HG-690	75	230	690	1100
5	HG-600B	51	200	600	1000
6	HG-688	76	344	688	1000
7	HG-678	51	226	678	1000
8	HG-720	51	240	720	1000
9	HG-750	51	250	750	1000
10	HG-555	65	185	555	1070
11	HG-915	76	305	915	1250
12	HG-760	62	253	760	1250
13	HG-914B	76	305	914	1250

Product Picture

Package

Hengri Factory Picture

Service & Technical Support

v Service
1. Various samples and combinations of samples
2. Recommendation to cost effective raw material(quality and price)
3. Accepting alteration before production
4. Financial credit support to special project
5. Sufficient storage and quick delivery, meeting different requirements
6. Three different criterions of packing
7. Service of transportation consignation
8. Concurrent manufacturing to the project of jobsite

v Technical Support

1. System solution consultant
    2. Customised solution design
    3. Initial system solution design
    4. Load calculations
    5. Confirmation of solution and design
    6. Drawing of purlins and sheetings
    7. Detail design (including trims, grade, sky light, ventilator, etc)