STANDARD   SPECIFICATION

Chassis   (Main Beam)

Heavy duty and extra durability designed, Opting for high tensile stell Q345. 

500mm height; Top flange 16*140mm; Middle flange 6 mm; Bottom flange16*140mm, Side beam 18 A, Floor Steel 3mm.  

Capacity: 60T                                                                

King pin

2" standard welded style

Landing gear

FUWA 19"heavy duty landing gear

Axle

Three Units of American style FUHE (brand) 13T 10 Hole Axle.

Suspension

Air bag suspension, the first axle lifted.

Tyre                 ( Wheel Rim)

13 units of 11R22.5 Tubeless Tyre, include one spare tyre.

13 units of 8.25*22.5 Wheel rim

Twist Lock

12 nos of ISO twist lock for 2*20ft; 1*40ft container, the central locks can be laid down.

Brake

WABCO RE 6 relay valve;Four units of T30/30 Spring brake chamber; Two units of T30 Spring brake chamber.    

Two units of reliable local brand 40L air tank.                            

Electric

International standard 24v circuit 7-pin ISO socket; Tail lamp with turn signal, brake light & reflector, side lamp etc. One set 6-core standard Cable.

Painting

Sand blasting processing clean rust 1 coat of anticorrosive primer, 2 coats of finish urethane paint  

color at customer’s choose.            

Other

One spare tyre holder; one box with a set of standard trailer tool. 

Distant from King pin to the front part: 450mm

Packing

Cut rear part of trailer about 700mm, load it in 40HQ container, fit it by screw in destination. 

One container carry two units.