Specifications
Radial drilling machine1. Requency conversion
2. Digital readout for spindle speed
3.Hydraulic pressure clamp
4.CE
ZB3080 x25 Frequency Conversion Radial Drilling Machine
Feature:
1. Frequency conversion transducer spindle stepless digital readout for the display of speed
2 Strength spindle, with limiting protection or limiting position
3. Electrical box and coolant button is on the fight of spindle box
4. Hydraulic pressure clamp; interlock of rocker arm clamping and up down movement; clamping of spindle and spindle box could be simultaneous or separated
5.Trochoid thin oil lubrication
6.With safety protection device;
7.At the bottom of lead screw and guide surface can be add protection device;
8.Importable electrical components with CE,CSA,UL standard
9.Electric box control by PIC
10.Length worktable ,supply inclined worktable and quick change colt as optional accessories
Specification:
Specification | ZB3080x20 | Z3080x25 |
Max. drilling diameter(on 45 steel) | Φ80 | |
Max. drilling diameter(on HT200 cast iron) | Φ105 | |
Max. tapping diameter(on Medium-carbon steel) | M52 | |
Max. tapping diameter (on cast iron) | M60 | |
Max. distance from spindle to generating line of column | 450-2050 | 450-2550 |
Distance of horizontal movement for spindle box(manual) | 1600 | 2100 |
Max. distance between spindle end to the worktable surface of the base | 400-1620 | |
Max. travel of the spindle | 400 | |
Spindle taper bore | MT.6 | |
Spindle speed steps | Stepless | |
Spindle speed range (r/min) | 30-220; | |
Spindle feed steps | 8 | |
Spindle feed range (mm/r) | 0.06,0.09,0.15,0.23,0.36,0.60,0.90,1.38 | |
Speed of rocker arm up and down movement (m/min) | 1.2 | |
Rotation angle of rocker arm (degree) | ±180 | |
Distance of spindle movement for calibrated dial each revolution (mm) | 151 | |
Power of main motor (transducer motor )(KW) | 7.5 | |
Power of motor for rocker arm up and down movement (KW) | 2.2 | |
Power of oil pump motor for spindle box, column and rocker arm clamping | 1.1 | |
Weight of machine (without worktakbe) (Kg) | 6800 | 7400 |
Machine dimension (LxWxH) (mm) | 3090x1250x3460 | 3590x1250x3530 |
Standard accessory:
- Key type drill chuck;
-Connection bar for drill chuck;
-Shaft sleeve for taper shank tool;
-Wedge for taper shank tool.
Optional accessory:
-Rotary table
-Quick change collet