CW62100Bx4000 brand new metal lathe machine
USD $20,000 - $40,000 /Set
Min.Order:1 Set
Shanghai Zhong Jing Imp. & Exp. Corporation
Metal Lathe Machine
Feature:
1.The surface of the bedways is supersonic frequency handened.
2.The spindle system is high in rigitidy and accuracy.
3.Rapid feed structure is available on Apron.
4.Clutch in headstock makes the lathe start smoothly and brake quickly
Specification:
ITEMS | CW62100B |
Max. swing over bed | Ø1000 mm |
Max. swing over carriage | Ø580 mm |
* Max. swing over gap | Ø1200 mm |
Width of bed | 600 mm |
*Effective length of gap | 400 mm |
Max. length of work piece(two centers) | 4000 mm |
Max. turning length | 3850 mm |
Max. Weight of work piece(between centers) | 2000kg |
Spindle nose | D11 |
Spindle bore | Ø104 mm |
Cone hole diameter and taper of spindle hole | Metric Ø120 1:20 |
Number of speeds | 18 |
Spindle speed scope | 5.4~720 r/min |
Pitch of longitudinal ball screw/diameter | 12 mm/ Ø55 |
Number of cross feeds | 64 |
Range of longitudinal feeds(1:1) | 0.1~1.52 r/min |
Range of longitudinal feeds(16:1) | 1.6~24.3 r/min |
Number of cross feeds | 64 |
Range of cross feeds | Half of longitudinal feeds |
Rapid feed for Axis Z | 4000 mm/min |
Rapid feed for Axis X | 2000 mm/min |
Thread cutting for Metric pitch threads(range/no.) | 1~240 mm/50 |
Thread cutting for Whit-worth pitch threads(range/no.) | 14~1 TPI/26 |
Thread cutting for Module threads(range/no.) | 0.5~120 mm/53 |
Thread cutting for D.P.threads(range/no.) | 28~1 DP/24 |
Vertical distance from spindle center to installing basis | 33 mm |
Size of tool shank | 32×32 mm |
Max. travel of cross slide | 520 mm |
Swing angle of tool post | ±90° |
Max. travel of middle tool post | 200 mm |
Tailstock taper of bore | M.T.NO.5 |
Tailstock sleeve travel | 250 mm |
Tailstock sleeve dia. | Ø100 mm |
Power of main motor | 11KW |
Rapid feed motor power | 1.1KW |
Power of cooling pump | 90W |
3m Overall dimensions(L×W×H) | 6155×1450×1685mm |
Net weight(3m) | 8150kg |
Note : The items with “*” are only for 62 series. |
Standard accessories:
-Ø 325 3jaw chuck
-Face Plate
-Morse reduction Metric 120 /M.T.NO.5
-Centers M.T.NO.5
-Wenches
-Operation manual
Optional accessories:
-Ø 500 4jaw chuck
-Follow rest
-Steady rest